Hi
Run a backup storage of primary pool to secondary pool and got:
06/02/1999 12:01:22 ANR8337I DLT volume A01435 mounted in drive MT3
(/dev/mt3).
06/02/1999 12:02:25 ANR8337I DLT volume A01444 mounted in drive MT2
(/dev/mt2).
06/02/1999 12:04:09 ANR8302E I/O error on drive MT2 (/dev/mt2) (OP=WRITE,
CC=205, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=SCSI adapter
failure). Refer to Appendix B in the 'Messages' manual for recommended
action.
06/02/1999 12:04:09 ANR8302E I/O error on drive MT3 (/dev/mt3) (OP=READ,
CC=205, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=SCSI adapter
failure). Refer to Appendix B in the 'Messages' manual for recommended
action.
06/02/1999 12:04:09 ANR1417W Access mode for volume A01435 now set to
"read-only" due to excessive read error.
06/02/1999 12:04:09 ANR1411W Access mode for volume A01444 now set to
"read-only" due to write error.
The next time I did it It's run OK.
Can anybody get me an idea please ...
T.I.A Robert
*****************************************************************
* Ouzen Robert E-mail: robert AT research.haifa.ac DOT il *
* Helpdesk Manager Phone: (972)-4-8240345 *
* Computer Center Fax: (972)-4-8342097 *
* University of Haifa (972)-4-8249177 *
* Mt. Carmel, Haifa 31905 Israel *
*****************************************************************
|