ADSM-L

Re: Labelling question.

1999-05-18 14:30:01
Subject: Re: Labelling question.
From: Logan Varatharasa <loganv AT AUSTIN.IBM DOT COM>
Date: Tue, 18 May 1999 13:30:01 -0500
Thanks a lot James!, It works!

Logan.

On Tue, 18 May 1999, James SPORER wrote:

>      If I set my directory to /usr/lpp/adsmserv/bin before I issue the
>      dsmlabel command I don't get the error message.
>
>
>
> ______________________________ Reply Separator 
> _________________________________
> Subject: Labelling question.
> Author:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>  at IPNET
> Date:    5/18/99 10:12 AM
>
>
> Hello All.
>
> I tried to use dsmlabel program on AIX to label my tapes.
>
> So I issued the command :  `dsmlabel -drive=/dev/mt0,23`
>
> and I got an error message:
>
>    "ANR0000E Error reading message repository for language AMENG."
>
> I am not sure if the language settings are wrong in
> some files. I had LANGuage en_US by default in
> /usr/lpp/adsmserv/bin/dsmserv.opt file. I changed that to LANGuage AMENG
> after the error message and still getting the same error.
>
> Then I thought of labelling from the adsm server console and tried
>
> LABEL LIBVOLUME TAPELIBRARY1 DSM001.
>
> First tape labelled ok.
>
> >From the 2nd tape on I am getting the following error:
> ----------------------------------------------------------------------
> adsm>
> ANR8306I 004: Insert 8MM volume DSM003 R/W into the slot with element
> number 12 of library TAPELIBRARY1 within 57 minutes; issue 'REPLY' along
> with the request ID when ready.
> reply 4
> ANR2017I Administrator SERVER_CONSOLE issued command: REPLY 4
> ANR8499I Command accepted.
> adsm>
> ANR8302E I/O error on drive TAPEDRIVE2 (/dev/mt1) (OP=WRITE, CC=404,
> KEY=45,
> ASC=30, ASCQ=05,
> SENSE=70.00.45.00.00.00.00.18.00.00.00.00.30.05.00.00.00.00.0-
> 0.01.00.00.00.04.92.B5.00.00.DB.00.00.00.,
> Description=Media incompatibility).
> Refer to Appendix B in the 'Messages' manual for recommended action.
> ANR8806E Could not write volume label DSM003 on the tape in library
> TAPELIBRARY1.
> ANR8814I Remove volume DSM003 from slot element 12 of library
> TAPELIBRARY1.
> ANR8802E LABEL LIBVOLUME process 6 for library DSM003 failed.
> ANR0985I Process 6 for LABEL LIBVOLUME running in the BACKGROUND
> completed with completion state FAILURE at 09:50:12.
> -----------------------------------------------------------------------
>
>
> I will appreciate all suggestions.
>
> Logan.
> IBM Austin, TX.
>
<Prev in Thread] Current Thread [Next in Thread>