ADSM-L

Re: Labelling question.

1999-05-18 13:33:36
Subject: Re: Labelling question.
From: James SPORER <james.sporer AT CCMAIL.ADP.WISC DOT EDU>
Date: Tue, 18 May 1999 11:33:36 -0600
     If I set my directory to /usr/lpp/adsmserv/bin before I issue the
     dsmlabel command I don't get the error message.



______________________________ Reply Separator _________________________________
Subject: Labelling question.
Author:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>  at IPNET
Date:    5/18/99 10:12 AM


Hello All.

I tried to use dsmlabel program on AIX to label my tapes.

So I issued the command :  `dsmlabel -drive=/dev/mt0,23`

and I got an error message:

   "ANR0000E Error reading message repository for language AMENG."

I am not sure if the language settings are wrong in
some files. I had LANGuage en_US by default in
/usr/lpp/adsmserv/bin/dsmserv.opt file. I changed that to LANGuage AMENG
after the error message and still getting the same error.

Then I thought of labelling from the adsm server console and tried

LABEL LIBVOLUME TAPELIBRARY1 DSM001.

First tape labelled ok.

From the 2nd tape on I am getting the following error:
----------------------------------------------------------------------
adsm>
adsm>
ANR8306I 004: Insert 8MM volume DSM003 R/W into the slot with element
number 12 of library TAPELIBRARY1 within 57 minutes; issue 'REPLY' along
with the request ID when ready.
reply 4
ANR2017I Administrator SERVER_CONSOLE issued command: REPLY 4
ANR8499I Command accepted.
adsm>
ANR8302E I/O error on drive TAPEDRIVE2 (/dev/mt1) (OP=WRITE, CC=404,
KEY=45,
ASC=30, ASCQ=05,
SENSE=70.00.45.00.00.00.00.18.00.00.00.00.30.05.00.00.00.00.0-
0.01.00.00.00.04.92.B5.00.00.DB.00.00.00.,
Description=Media incompatibility).
Refer to Appendix B in the 'Messages' manual for recommended action.
ANR8806E Could not write volume label DSM003 on the tape in library
TAPELIBRARY1.
ANR8814I Remove volume DSM003 from slot element 12 of library
TAPELIBRARY1.
ANR8802E LABEL LIBVOLUME process 6 for library DSM003 failed.
ANR0985I Process 6 for LABEL LIBVOLUME running in the BACKGROUND
completed with completion state FAILURE at 09:50:12.
-----------------------------------------------------------------------
I will appreciate all suggestions.
I will appreciate all suggestions.

Logan.
IBM Austin, TX.
<Prev in Thread] Current Thread [Next in Thread>