We are about to share a 3494 with some systems which are not in our
internal net. Due to these restrictions we have to connect to the 3494
control box via a firewall, but we don't know which tcp ports are used
by lmcpd. We found an entry in /etc/inittab which means the 3494 uses
tcp port 3494 (!) but we traced some network traffic and don't know if
3494 is all needed...

Any ideas?


Roger Hohmann

WestLB
Division: 009 Services
Abteilung: 001-80633
Herzogstra?e 15
D - 40217 Dusseldorf
Tel.: +49211 826 8155
mailto:roger_hohmann AT westlb DOT de