Anthony,

Is the drive on the supported device list from the ADSM web page?  If not,
you can only define it as GENERICTAPE.

Check the device section under the Utilities program.  If the tape drive
shows an ADSM device type of GENERICTAPE, you're done.  If it shows 4mm you
would be able to define it as 4mm.

The determining factor is actually the devices that are shown in
adsmscsi.sys and the device type string returned from the SCSI device.

Bill Smoldt    SSSI
Storage Solutions Specialists, Inc.
www.storsol.com
smoldt AT storsol DOT com