Does your library have more than 1 drive? I appears Drive 1 has an error, so
maybe your second drive is handling the labeling.


> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> Johan Poll
> Sent: Thursday, March 04, 1999 5:01 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Problems with labelling tapes
>
>
> Hi ADSM folks,
>
> I have some strange problems when using the LABEL LIBV command.
> My ADSM configuration consists of Windows NT 4.0 server (SP3) and IBM
> Magstar 3570 connected by an Adaptec AHA-2944 adapter. The MagStar 3570
> drives consists of firmware level 41BA. Firmware 4215 has the
> same problem.
>
> The problem is that it looks that the tape is not labelled correctly. But
> is i use it, it looks that is was labelled fine.
>
> My question is if anyone has the same problems and how it can be fixed ?
>
> My actions are:
> Running a macro with the following entries:
> /* Audit the library for removed cartridges */
> audit library maglib checkl=barcode
> commit
> /* Label the cartridges */
> label libv maglib labelsource=barcode checkin=scr overwrite=no search=yes
> commit
>
> The output in the ADSM server ACTLOG is:
> 02/12/1999 16:56:20  ANR0984I Process 89 for AUDIT LIBRARY started in the
>                       BACKGROUND at 16:56:20.
> 02/12/1999 16:56:20  ANR8457I AUDIT LIBRARY: Operation for library MAGLIB
>                       started as process 89.
> 02/12/1999 16:56:20  ANR0984I Process 90 for LABEL LIBVOLUME
> started in the
>                       BACKGROUND at 16:56:20.
> 02/12/1999 16:56:20  ANR8799I LABEL LIBVOLUME: Operation for
> library MAGLIB
>                       started as process 90.
> 02/12/1999 16:56:55  ANR8461I AUDIT LIBRARY process for library MAGLIB
>                       completed successfully.
> 02/12/1999 16:56:55  ANR0985I Process 89 for AUDIT LIBRARY running in the
>                       BACKGROUND completed with completion state
> SUCCESS at
>                       16:56:55.
> 02/12/1999 16:58:13  ANR8302E I/O error on drive DRIVE1 (MT1.0.0.1)
> (OP=READ,
>                       CC=404, KEY=03, ASC=31, ASCQ=00,
>
> SENSE=F0.00.03.00.00.00.50.48.00.00.00.00.31.00.FE.0A.36-
>
> .3B.10.10.00.09.01.31.08.45.5C.44.20.A0.08.00.00.33.78.0-
>
> 0.00.33.36.00.06.33.3D.00.06.00.00.00.00.00.00.00.01.00.-
>                       00.00.2C.A0.00.00.00.00.00.00., Description=Media
>                       incompatibility).  Refer to Appendix B in the
> 'Messages'
>                       manual for recommended action.
> 02/12/1999 16:58:18  ANR8810I Volume 1CF8A9 has been labelled in library
>                       MAGLIB.
> 02/12/1999 16:58:28  ANR8427I CHECKIN LIBVOLUME for volume 1CF8A9 in
> library
>                       MAGLIB completed successfully.
> 02/12/1999 16:58:29  ANR8801I LABEL LIBVOLUME process 90 for
> library MAGLIB
>                       completed; 1 volume(s) labelled, 1 volume(s)
> checked-in.
> 02/12/1999 16:58:29  ANR0985I Process 90 for LABEL LIBVOLUME
> running in the
>                       BACKGROUND completed with completion state
> SUCCESS at
>                       16:58:29.
>
>
>
> with kind regards, / met vriendelijke groeten,
> Johan Pol
> Boerhaavelaan 11 - 2713 HA - Zoetermeer - Tel. (+31)79 3223051 - Fax.
> (+31)79 3213989
> Internet :JPol AT nl.ibm DOT com / johan.pol AT xerion.be.philips DOT com
>