Re: Automated tape error

Hi Marco,

we get very simmilar errors here with ADSM v2r1m15 und OS/2 when performing
checkin or checkout with using the mailbox slot.
We run the ADIC SCALAR 458 in EXABYTE 480 emulation because then 1 of the
10 mailboxes and the barcode reader is supported.

16.02.1999 18:07:15  ANR8434I CHECKOUT LIBVOLUME: Operation for volume
000003
                      in library AUTOLIB started as process 5.
16.02.1999 18:07:15  ANR8300E I/O error on library AUTOLIB (OP=00000023,
                      CC=207, KEY=05, ASC=24, ASCQ=00,

SENSE=70.00.05.00.00.00.00.0E.00.00.00.00.24.00.00.00.00-
                      .00.00.00.00.00., Description=Device is not in a
state
                      capable of performing request).  Refer to Appendix B
in
                      the 'Messages' manual for recommended action.
16.02.1999 18:07:31  ANR8300E I/O error on library AUTOLIB (OP=00000023,
                      CC=207, KEY=05, ASC=24, ASCQ=00,

SENSE=70.00.05.00.00.00.00.0E.00.00.00.00.24.00.00.00.00-
                      .00.00.00.00.00., Description=Device is not in a
state
                      capable of performing request).  Refer to Appendix B
in
                      the 'Messages' manual for recommended action.
16.02.1999 18:07:31  ANR8322I 001: Remove DLT volume 000003 from entry/exit
                      port of library AUTOLIB; issue 'REPLY' along with the
                      request ID when ready.
16.02.1999 18:08:03  ANR8300E I/O error on library AUTOLIB (OP=00000023,
                      CC=207, KEY=05, ASC=24, ASCQ=00,

SENSE=70.00.05.00.00.00.00.0E.00.00.00.00.24.00.00.00.00-
                      .00.00.00.00.00., Description=Device is not in a
state
                      capable of performing request).  Refer to Appendix B
in
                      the 'Messages' manual for recommended action.
16.02.1999 18:08:03  ANR8438I CHECKOUT LIBVOLUME for volume 000003 in
library
                      AUTOLIB completed successfully.



Gerhard




Bitte antworten an ADSM-L AT VM.MARIST DOT EDU

An:    ADSM-L AT VM.MARIST DOT EDU
Kopie:  (Blindkopie: ADSMLIST)
Thema: Automated tape error




When I configure an ADIC SCALAR 1000 automated scsi tape library to ADSM, I
get the following error.

ANR2017I Administrator ADMIN issued command: DEFINE LIBR
                      adic libt=scsi devi=lb6.0.0.0
ANR8300E I/O error on library ADIC (OP=8401C050, CC=207,
                      KEY=05, ASC=24, ASCQ=00,
                      SENSE=F0.00.05.00.00.00.00.0A.00.00.00.00.24.00.00.C0
                      .00-
                      .07., Description=Device is not in a state capable of
                      performing request).  Refer to Appendix B in the
                      'Messages' manual for recommended action.
ANR8418E DEFINE LIBRARY: An I/O error occurred while
                      accessing library ADIC.
ANR2017I Administrator ADMIN issued command: ROLLBACK

This is with Server revision level 3.1.2.0 and 3.1.2.13.

But it works with ADSM at revision level 3.1.1.3 the library works fine.

Thanks
Marco