We purchased ADSM in hopes of getting rid of ArcServe and 4mm tapes. In
order for us to keep it, we have to prove that ADSM is going to be at least
as fast as ArcServe. So far, I haven't been able to pull it off. I thought
I
would ask the list what kind of transfer rates they (you) were getting. I
realize that there are about a million factors that can have an effect on
the rate, so I'm really only looking for some good ballpark figures, but
even that may not be possible.

Here's the setup...

133Mhz Pentium, NT server with 100+ MB RAM and a 10Mb pipe. Compression is
off and all setting are at optimum per the "Performance Tuning Guide". Data
passes from the server (client) to a router, then out of the router into
the
mainframe (S/390) in the next room. Again, a 10Mb pipe all the way. ADSM is
v3r1. Should I be getting better than 575-600K/sec?

Thanks for any help.

--
Doug Brown
Doug Brown

21F3 8086 1D2D 5ED0 1794  2ED9 CFC3 8043 928B 6551