Restore Speeds, continued
1999-01-28 14:11:41
We've done more trial runs on restore speeds, and coming up with worrisome
results. Our setup is:
IBM 7000 servers
1gig RAM
4 x 200MHz CPU's
DLT3570 tape drive (aka DLT4)
NT Server 4, SP4
ADSM v3
2 x 100mb Ethernet (one card is a dedicated network for backups)
We know we've got network issues, giving us about 1 to 1.2 gig/hr restore
speeds. I did a trial restore to a local disk on the backup server (thus
not using the network), and got 5.7gig/hr.
Here's the problem- we've got a 260gig EMC box that's on a 24hr recovery
SLA. Even if we get 5gig/hr over the network, that's 52 hours in tape
restore alone.
1) What restore speeds are other clients getting?
2) Would switching to ArcServe or other non-ADSM software help?
3) Is this reasonable SLA for conventional tape backup & restore? (as
opposed to a mirrored EMC box)
____________________________________________________________
Mitchell Ross mailto:mitch.ross AT ncgroup DOT com
CompuCom Systems, Inc. http://www.ncgroup.com
The Source for Technology Deployment Processes and Standards
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Restore Speeds, continued,
Ross, Mitch <=
|
|
|