No, 1500 is the backup port.  If you wish to use the admin
port it is 1580.  If you wish to use the Shared Memory
port it is 1510.  Be careful that you can actually see the
IP address from outside your firewall.  If you are doing any
IP masquerading or Poxy'ing, then you will have to redirect
the IP address at the firewall.

-good luck , Ben
Michael Abel wrote:
Michael Abel wrote:
>
> Hi ADSMers!
>
> We want to save a NT box that is located in the DMZ outside a Firewall, the
> ADSM server is on the internal network. Question: are there any other ports
> beside 1500 that we have to open so that the client can reach the ADSM
> server through the firewall? Has anybody successully implemented an
> environment like that?
>
> Mit freundlichem Gruss/Best Regards
>
> Michael Abel
> IBM Certified Advanced Technical Expert - RS/6000 AIX
> IBM Certified Specialist - ADSM
> =====================================================
> res nova Unternehmensberatung GmbH
>                    ...aktiv in AIX
> MAIL:  Ruppmannstrasse 41
>        D-70565 Stuttgart, Germany
> FON:   +49 711 78888 0
> FAX:   +49 711 78888 99
> WWW:   http://www.resnova.de
> EMAIL: mailto:Michael.Abel AT resnova DOT de