Re: TAPEUTIL
1998-11-11 15:54:14
Johan,
there is a tool called ntutil available for NT. It is part of the Magstar
Device Drivers for NT available at the ADSM ftp server and its mirrors.
With ntutil you can control some operations on a 3570. But why do you want
to control cleaning from outside - the MP does it itself if you insert the
cleaning cartridge in the internal slot reserved for that purpose (refer to
the operation manual for that). My problem ist to get to know when the 100
cleaning cycles are done.
Mit freundlichem Gruss/Best Regards
Michael Abel
IBM Certified Advanced Technical Expert - RS/6000 AIX
IBM Certified Specialist - ADSM
=====================================================
res nova Unternehmensberatung GmbH
...aktiv in AIX
MAIL: Ruppmannstrasse 41
D-70565 Stuttgart, Germany
FON: +49 711 78888 0
FAX: +49 711 78888 99
WWW: http://www.resnova.de
EMAIL: mailto:Michael.Abel AT resnova DOT de
Johan Pol <JPol AT NL.IBM DOT COM> on 11.11.98 18:18:33
Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
cc: (bcc: Michael Abel/resnova)
Subject: TAPEUTIL
Hi all,
Does anyone know if there is a utility available to control a IBM MagStart
3570
?
I know that such a tool is available from within AIX, but is it from NT or
DOS ?
Please help.....we would like to control our MagStar remotely. We would
like
for example to start a cleaning operation.
with kind regards, / met vriendelijke groeten,
Johan Pol
Boerhaavelaan 11 - 2713 HA - Zoetermeer - Tel. (+31)79 3223051 - Fax.
(+31)79
3213989
Internet :JPol AT nl.ibm DOT com / johan.pol AT xerion.be.philips DOT com
|
|
|