We are seeing similar errors on an AIX host. Two questions,
1) Are you attached to a Windows or AIX ADSM server?
2) Your note mentions a DLT tape forum - is there a separate list server for
this?
Thanks.
11/02/1998 13:11:44 ANR8302E I/O error on drive STK_0_0_2_5 (/dev/rmt6)
(OP=FSR, CC=-1, KEY=03, ASC=11, ASCQ=00, Description=An undetermined error
has occurred). Refer to Appendix B in the 'Messages' manual for recommended
action.
11/02/1998 13:29:22 ANR8302E I/O error on drive STK_0_0_2_5 (/dev/rmt6)
(OP=FSR, CC=-1, KEY=03, ASC=11, ASCQ=00, Description=An undetermined error
has occurred). Refer to Appendix B in the 'Messages' manual for recommended
action.
> -----Original Message-----
> From: Blondeau, David (MED-Cap Gemini) [SMTP:BLONDDA AT EUROMSX.GEMSE DOT FR]
> Sent: Friday, October 30, 1998 11:50 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: DLT7000: Media Failure
>
> Dear Adsmers,
>
> Is anyone aware of I/O errors on DLT7000 ?
> please see below the description , and the answer of Quantum technical
> support.
> my question on the DLT tape Forum:
> We currently use adsm V3 with STK9714, 4 DLT drives.
> Since a month we are experiencing problems with
> I/O operations, on several tapes, with several
> drives.
> These drives never ask to be cleaned (There is a cleaning
> cartridge inside the library. We did a clean from the
> library control panel, but we are still having these errors
> ( that cancels our move data process)
> Sample of log error:
> 10/26/1998 22:14:00 ANR8302E I/O error on drive DLT1 (MT1.0.0.2)
> (OP=LOCATE,
> CC=306, KEY=03, ASC=11, ASCQ=00,
>
>
> SENSE=F0.00.03.00.00.EA.16.16.00.06.9C.7A.11.00.00.00.00-
> .00.81.00.F9.00.00.9A.50.00.5D.78.A0.,
> Description=Drive
> or media failure).
> 10/25/1998 09:00:00 ANR8302E I/O error on drive DLT0 (MT0.0.0.2)
> (OP=READ,
> CC=408, KEY=03, ASC=80, ASCQ=01,
>
>
> SENSE=F0.00.03.00.00.00.00.16.00.04.AB.A3.80.01.00.00.00-
> .00.81.00.F9.00.00.9A.50.00.6D.F4.8D.,
> Description=Clean
> the media and the drive).
> 10/09/1998 09:46:51 ANR8302E I/O error on drive DLT0 (MT0.0.0.2)
> (OP=LOCATE,
> CC=205, KEY=FF, ASC=FF, ASCQ=FF,
> SENSE=**NONE**,
>
> Description=SCSI adapter failure).
>
> ***************************************
> > RE: DLT7000 Media Failure
> > By Dick Stone() on 10/29/98 11:56:06 AM
> >
> > There are ADSM events suggesting a problem with DLT7000 that we are
> > investigating. Currently, the situation is not lending itself clearly to
> > the location of problem. Your situation seems to be exhibiting the same
> > characteristics but right now we don't have a solution. If you're in
> > position to make more observations, we would be interested hearing about
> > additional behavior you have noticed.
> *****************************************
>
> Thanx for any information
> regards
> David Blondeau
|
