===========================================================================
Folks,
I have the following environment:

Solaris v.2.5.1
ADSM Server for Solaris v.3.1.2.0
Qualstar TLS-46120 with 4 drives SONY SDX-300C

To setup this environment, I executed the following commands:

def library robo libtype=scsi device=/dev/rmt/5lb
def drive robo drive1 device=/dev/rmt/7mt element=500
def drive robo drive2 device=/dev/rmt/8mt element=501
def drive robo drive3 device=/dev/rmt/9mt element=502
def drive robo drive4 device=/dev/rmt/10mt element=503
def devclass aitclass devtype=8mm format=aitc library=robo
mountlimit=drives

Until now, everything works fine.

But, when I execute the command "label libvol robo checkin=scratch
search=yes labelsource=prompt" and the elevator put the tape inside the
drive, I receive the following error:

ANR8302E I/O Error on drive DRIVE1 (/dev/rmt/7mt) (OP=SETMODE, CC=207,
KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=device is not in a
state capable of performing request.)

The command don't work.

Anyone can help to solve this problem ???
=====================================================================

This problem is fixed in PTF2 for V3.1.2.0.  In the meantime, you can use
dsmlabel instead - the tape label code is there for this device support in
dsmlabel.

ADSM Sun Server Development