hi all,
i wonder anyone out there has seen this one:
env: adsm v2.1.6 running on aix4.1.5, ibm 3995 magneto-optical library
one of my mo disk has a read error on it and then when adsm tries to
access it, the following error occurs:
08/24/98 08:17:53 ANR8434I CHECKOUT LIBVOLUME: Operation for volume MBS04
in library MO-LIBRARY started as process 9.
08/24/98 08:17:53 ANR8300E I/O error on library MO-LIBRARY (OP=00006C03,
CC=314, KEY=05, ASC=3B, ASCQ=0E, Description=The
source slot or drive was empty in an attempt to
move a volume).
Refer to Appendix B in the 'Messages' manual for
recommended action.
08/24/98 08:17:53 ANR8437E CHECKOUT LIBVOLUME for volume MBS04 in library
MO-LIBRARY failed.
but when issure a "q libvol" this volume shows up in the library. did adsm
lose track of something or the library go wrong? by the way i tried to
update the access mode of the volume to read/write but it wouldn't work. i
then changed it to unavailable so that my archive request would go for
other volumes in the same pool (mbs05). looks like a ghost volume to me.
anyone has an idea where i can go from here?
thanks a lot!
adsm> q libvol mo-library
Library Name Volume Name Status Last Use
------------ ----------- ----------------- ---------
MO-LIBRARY MBS04 Private(Optical) Data
MO-LIBRARY MBS04 Private(Optical) Data
MO-LIBRARY MBS05 Private(Optical) Data
....
adsm> q vol mbs04 f=d
Volume Name: MBS04
Storage Pool Name: MBS-ARCHIVE
Device Class Name: MO-AUTO
Estimated Capacity (MB): 1,300.0
%Util: 7.0
Volume Status: Filling
Access: Unavailable
Pct. Reclaimable Space: 0.0
Scratch Volume?: No
In Error State?: No
Number of Writable Sides: 2
Number of Times Mounted: 6
Write Pass Number: 1
Approx. Date Last Written: 07/28/98 05:26:27
Approx. Date Last Read: 07/29/98 06:33:58
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 1
Volume Location:
Last Update by (administrator): SERVER_CONSOLE
Last Update Date/Time: 08/24/98 08:28:31
yu chen
|