The tapes are already labeled with barcode.  Is there something special I
have to do so that ADSM knows this?  I didn't have to do anything with the
first tapes.

By the way this is ADSM on NT4.0.

Rose

> -----Original Message-----
> From: James SPORER [SMTP:james.sporer AT CCMAIL.ADP.WISC DOT EDU]
> Sent: Monday, August 24, 1998 11:03 AM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: checking in new tapes on 3575
>
>      The volumes need to be labeled before you can check them in.
>
>
>
> ______________________________ Reply Separator
> _________________________________
> Subject: checking in new tapes on 3575
> Author:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>  at IPNET
> Date:    8/24/98 9:13 AM
>
>
> Hi all,
>
> I have a Data General Aviion with a Clariion 3000 - 30 disk raid array
> connected to an IBM 3575 - L12, which we just upgraded to an L18 on
> Friday.
>
> The problem is when I try to check the new tapes in I get the error I have
> added below.  The command that I am typing is:  checkin libv warf stat=scr
> search=yes
>
> If anyone has any thoughts on this matter I would greatly appreciate the
> input.
>
>
> 08/24/1998 07:33:39      ANR8302E I/O error on drive MT0 (MT0.0.0.1)
> (OP=READ,
>                           CC=403, KEY=08, ASC=14, ASCQ=01,
>
>
> SENSE=F0.00.08.00.00.00.50.48.00.00.00.00.14.01.FF.0A.36-
>
> .33.00.00.00.09.01.91.00.45.50.04.00.00.08.00.00.33.19.0-
>
> 0.54.33.35.10.02.33.3D.00.00.00.00.00.00.00.00.00.01.00.-
>                           00.00.2C.90.00.00.00.00.00.00.,
> Description=Media
>
>                           failure).  Refer to Appendix B in the 'Messages'
> manual
>                           for recommended action.
>
> 08/24/1998 07:33:39      ANR8357I Error reading label of volume in drive
> MT0
>
>                           (MT0.0.0.1) of library WARF.
>
> 08/24/1998 07:34:14      ANR8302E I/O error on drive MT1 (MT1.0.0.1)
> (OP=READ,
>                           CC=403, KEY=08, ASC=14, ASCQ=01,
>
>
> SENSE=F0.00.08.00.00.00.50.48.00.00.00.00.14.01.FF.0B.36-
>
> .33.00.10.00.09.01.91.00.45.50.04.00.00.08.00.00.33.19.0-
>
> 0.54.33.35.10.02.33.3D.00.00.00.00.00.00.00.00.00.01.00.-
>                           00.00.2C.90.00.00.00.00.00.00.,
> Description=Media
>
>                           failure).  Refer to Appendix B in the 'Messages'
> manual
>                           for recommended action.
>
> 08/24/1998 07:34:14      ANR8357I Error reading label of volume in drive
> MT1
>
>                           (MT1.0.0.1) of library WARF.
>
>
> Thanks,
> Rose M. Campbell
> Data Storage Manager
> Joint National Test Facility
> 720 Irwin Avenue
> Schriever AFB, CO  80912-7200
> 719-567-8454
> 719-567-8288 (fax)
> email - rose AT jntf.osd DOT mil