There's also a Windows admin gui client available.

Tina

> -----Original Message-----
> From: Jennifer Davis [SMTP:jedavis AT DFW DOT NET]
> Sent: Monday, July 13, 1998 10:46 PM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: ADSM V3 GUI File libtt.a is missing .
>
> Yes, Andy is correct, but ...............
>
> Technically, there is no admin GUI for V3 on AIX, only the Web Admin
> client.
> V 3.1.0.0 through 3.1.0.2 have the fileset adsm.client.admin.
>
> However, starting with 3.1.0.3 this fileset is no longer installed and
> any
> remaining "parts" that do not relate directly to the need for Motif
> Library
> based GUI has been "relocated" to other filesets.
>
> The installp scripting does not actually remove the V2 admin fileset
> if you
> install 3.1.0.3 without first installing an earlier level, so that
> persons
> that are using V2 servers still have GUI.
>
> You will see the following trends:
>
> V2 previously installed before upgrading to V3 and you do not
> uninstall V2
> before installing V3 (use force overwrite flag):
> lslpp -l |grep adsm --> you will notice that adsm.client.admin is
> listed
> like 2.1.20.7 and all other adsm.client.* are are somthing like
> 3.1.0.0
>
> V3 base previously installed before installing V3 PTFs less than level
> 3.1.0.3:
> lslpp -l |grep adsm --> you will notice that all adsm.client.*
> filesets,
> including adsm.client.admin are somthing like 3.1.0.0
>
> Neither V2 or V3 installed when installing level 3.1.0.3:
> No adsm.client.admin fileset is installed.
>
> FYI -
>
>
> Jennifer
>
>
> At 12:30 PM 7/13/98 -0400, you wrote:
> >Hello,
> >
> >Please make sure that you have this fileset installed:
> >
> >     X11.Dt.ToolTalk
> >
> >Best regards,
> >
> >Andy
> >
> >Andy Raibeck
> >IBM Storage Systems Division
> >ADSM Client Development
> >e-mail: storman AT us.ibm DOT com
> >
> >
> >
> >ADSM-L AT VM.MARIST DOT EDU on 07/13/98 09:04:22 AM
> >Please respond to ADSM-L AT VM.MARIST DOT EDU
> >To: ADSM-L AT VM.MARIST DOT EDU
> >cc:
> >Subject: ADSM V3 GUI File libtt.a is missing .
> >
> >
> >Hi ADSM-ers
> >
> >Today I've upgraded my first ADSM AIX-Client to Version 3.
> >Command-Line Clients [Both Backup- and Archive ] work very well ,
> >but if I start the GUI the following Message appears.
> >
> >root@******** /tmp/inst.images>dsm
> >        0509-037 System error - error data is: dsm
> >        0509-022 Cannot load library libtt.a[shr.o].
> >        0509-026 System error: A file or directory in the path name
> does
> >not exist.
> >
> >{remainder of post deleted}
> >
> >