ADSM/NT: define library compaq dlt 1530
2015-10-04 17:57:46
Hi All !
Windows NT: 4.0 Service Pack 3
ADSM Server (SHARED BASE) 3.1.1.3
ADSM Server Utilities 3.1.1.1
The problem:
We try to define a library compaq dlt 1530 with 2 drives.
define library lib1 libtype=scsi device=lb6.0.0.3
ANR8418E DEFINE LIBRARY: An I/O error occurred while accessing library
LIB1.
ANS8001I Return code 3.
The ADSM Server Utilities / Diagnostics says the following:
Device Type Name Type ID LUN Bus Port Device
------------------------------------------------------------------------
--------
--------
TapePeripheral mt4.0.0.3 DLT 4 0 0 3 DEC DLT2000 CPQ
TapePeripheral mt4.0.0.3 DLT 4 0 0 3 DEC DLT2000 CPQ
LDRV8626
TapePeripheral mt5.0.0.3 DLT 5 0 0 3 DEC DLT2000 CPQ
LDRV8626
MediumChangerPeripheral n/a n/a 6 0 0 3 HP C5151-2000 2.06
The program lbtest says the following:
variables settings
=========================
special file: lb6.0.0.3
return_error_when_fail 1 exit_on_unexpected_result 0
manual test menu:
=================
1: set device special file
2: display symbols
3: set return error when fail
4: set exit on unexpected result
5: set buffer address
6: open 7: close
...
99: return to main menu
enter selection: 6
special file (lb6.0.0.3) will be opened
analyze rc -1 err 22 (?,???)
cc 0 (Successful) resid 0 data 0
lbtest error return_error device closed
analyze conclusion ... ERROR not as expected
ERROR, test failed!
Total elapsed time in seconds = 0.00
Return to continue:
Thanks
Andreas Boesler.
|
|
|