The element number should be in a README file in the ADSM Server installation
directory -- I havn't installed on NT in a while so I don't know the default
directory...
Campbell, Rose wrote:
> Andreas,
>
> We had the same problem, we found the element number in one of the 3570
> books, try element=16, if you have 2 drives the second is 17.
>
> Since the error is an I/O error you may have a problem with the drive and
> need to call IBM for service.
>
> Hope this helps!
>
> Rose M. Campbell
> Data Storage Manager
> Falcon AFB
> 720 Irwin Avenue
> Colorado Springs, CO 80912-7300
> 719-567-8454
> Internet mail address:
> rose AT jntf.osd DOT mil
>
> > -----Original Message-----
> > From: Andreas Boesler [SMTP:bo AT BBMA2.MA.BUB DOT DE]
> > Sent: Monday, May 25, 1998 8:05 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: adsm 3.1 for nt with library compaq dlt 3570
> >
> > Hi all,
> >
> > I try to define a library compaq dlt 3570 with 2 drives.
> >
> > The command
> > define library lib1 libtype=scsi device=lb6.0.0.1
> > was ok.
> >
> > But the command
> > define drive lib1 drive1 device=mt4.0.0.1 element=1
> > brings the error
> > ANR8420E DEFINE DRIVE: An I/O error occured while accessing drive
> > DRIVE1.
> >
> > I don't know the element#s. I tried all numbers until 128.
> > The library is in the list "supported devices" but NOT in the
> > Administrators Guide on
> > http://www.storage.ibm.com/software/adsm/pubs/v3pubs/wnt/html/admgde/a45ea
> > 191.htm#Header_765
> >
> > The ADSM Server Utilities / Diagnostics says the following.
> >
> > Device Type ADSM Device Name ADSM Device Type ID LUN Bus
> > Port Device Identifier
> > --------------------------------------------------------------------------
> > - -------------------
> > TapePeripheral n/a GENERIC TAPE 4 0 0 1
> > DT00CQLR13AS-32160 S6CA
> > TapePeripheral n/a GENERIC TAPE 5 0 0 1
> > DT00CQLR13
> > MediumChangerPeripheral lb6.0.0.1 LIBRARY 6 0 0 1
> > HP C5173-7000 4.01
> >
> >
> > ADSM-Version: 3.1.1.2
> >
> > NT: 4.0 / Service Pack 3 / driver not loaded
> >
> > Thanks
> > Andreas Boesler.
--
Steffan Rhoads
Steffan Rhoads
Lead Technical Consultant
Think Enterprise Solutions
10 Holland
Irvine, California 92618-2504
srhoads AT westernmicro DOT com
|