Thanks.

But what are the element#'s of the 2 drives ?

The online-book at
http://www.storage.ibm.com/software/adsm/pubs/v3pubs/wnt/html/admgde/a45eawn2.htm

seems to be old.

Andreas.


Kelly J. Lipp wrote:

> The syntax is like like:
>
> define library 3570lib device=lb3.0.0.1 libtype=scsi
> define drive 3570lib drive1 device=mt4.0.0.1 element=element#
>
> Where lb3 is the correct scsi address for the robot and mt4 is the correct
> scsi address for the drive.  You can get these from the ADSM server
> uitlities Diagnostic.
>
> You also need to define a device class.  Do a help define devclass to get
> the syntax for the 3570.
>
> Then you need a sequential access primart storage pool using this new
> device class.  Then have a disk pool with the nextstg parameter set to this
> new pool.  You should be all set.
>
> Kelly Lipp
> Storage Solutions Specialists, Inc.
> lipp AT storsol DOT com
> www.storsol.com
> (719) 531-5926
>
> -----Original Message-----
> From:   Andreas Boesler [SMTP:bo AT BBMA2.MA.BUB DOT DE]
> Sent:   Friday, May 22, 1998 10:28 AM
> To:     ADSM-L AT VM.MARIST DOT EDU
> Subject:        nt: how to define libr. compaq dlt 3570, hp c5173-7000
>
> Hi all,
>
> if i want to use adsmscsi to define the compaq library dlt 3570
> (scsi-adapter says hp c5173-7000 4.01), it says
>
>         The system cannot find the devices specified
>
> How to define the library and the drives ?
>
> Thanks
>
> Andreas.