3570 CHECKIN LIBVOLUME
1998-03-26 16:35:22
Okay, I've done:
------------------------------------------------------------------
label libv 3570libr search=yes labels=barcode checkin=scratch
label libv 3570libr search=yes labels=barcode checkin=scratch
ANS8003I Process number 3 started.
------------------------------------------------------------------
Which worked. Then I forced a migration after a backup:
Which worked. Then I forced a migration after a backup:
------------------------------------------------------------------
update stgpool backuppool highmig=0 lowmig=0
update stgpool backuppool highmig=0 lowmig=0
------------------------------------------------------------------
Which resulted in:
Which resulted in:
03/26/98 15:02:29 ANR2202I Storage pool BACKUPPOOL updated.
03/26/98 15:02:29 ANR0984I Process 4 for MIGRATION started in the
BACKGROUND
at 15:02:29.
03/26/98 15:02:29 ANR1000I Migration process 4 started for storage pool
BACKUPPOOL.
03/26/98 15:02:30 ANR0405I Session 201 ended for administrator FRAMAEKE
(WebBrowser).
03/26/98 15:02:30 ANR1025W Migration process 4 terminated for storage
pool
BACKUPPOOL - insufficient space in subordinate
storage
pool.
03/26/98 15:02:30 ANR0985I Process 4 for MIGRATION running in the
BACKGROUND
completed with completion state FAILURE at 15:02:30.
03/26/98 15:02:30 ANR1002I Migration for storage pool BACKUPPOOL will
be
retried in 60 seconds.
------------------------------------------------------------------
I assume this is because there are no volumes in the STGPOOL for the 3570.
I assume this is because there are no volumes in the STGPOOL for the 3570.
So, I tried:
------------------------------------------------------------------
checkin libvolume 3570libr status=scratch search=yes checklabel=barcode
checkin libvolume 3570libr status=scratch search=yes checklabel=barcode
------------------------------------------------------------------
Which resulted in:
Which resulted in:
------------------------------------------------------------------
03/26/98 15:20:03 ANR0984I Process 10 for CHECKIN LIBVOLUME started in
03/26/98 15:20:03 ANR0984I Process 10 for CHECKIN LIBVOLUME started in
the
BACKGROUND at 15:20:03.
03/26/98 15:20:03 ANR8422I CHECKIN LIBVOLUME: Operation for library
3570LIBR
started as process 10.
03/26/98 15:20:40 ANR1436E Device configuration file
/home/ADSM/Device_Conf-
iguration cannot be opened.
03/26/98 15:20:40 ANR1435E Server could not write device configuration
information to /home/ADSM/Device_Configuration.
03/26/98 15:20:40 ANR8431I CHECKIN LIBVOLUME process completed for
library
3570LIBR; 0 volume(s) found.
03/26/98 15:20:40 ANR0985I Process 10 for CHECKIN LIBVOLUME running in
the
BACKGROUND completed with completion state SUCCESS
at
15:20:40.
------------------------------------------------------------------
What am I doing wrong?
What am I doing wrong?
1) I cannot find an explaination of "PRIVATE" volumes vs. "SCRATCH"
volumes. (Note: Currently we have no plans to use the 3570 for other than
ADSM).
2) Where did this '/home/ADSM/Device_Configuration' come from? Going
through the V3 "Quick Start", I never saw any mention of this file.
Thanks in advance,
Frank M. Ramaekers Jr. Austin Community College Voice: (512)223-7619
Systems Programmer 5930 Middle Fiskville Rd. Fax: (512)483-7664
Information Services Austin, Texas 78752-4390
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- 3570 CHECKIN LIBVOLUME,
Frank M. Ramaekers Jr. <=
|
|
|