ADSM-L

Re: HP C1553A definition problem

1998-03-04 05:39:39
Subject: Re: HP C1553A definition problem
From: Bruno Friess <bfriess AT DE.IBM DOT COM>
Date: Wed, 4 Mar 1998 10:39:39 +0000
Please have a look in the config.sys file:

BASEDEV=AIC7870.ADD /ET

You must add the /ET param and reboot the machine. Then you will see the drive
and the changer.
(If you are not using a Adaptec or compatible controller, then the driver have
a different name)

Best Regards / Freundliche Gruesse / Amicalement
Bruno Friess

Advanced Technical Support  ADSM





ADSM-L AT VM.MARIST DOT EDU on 03/03/98 12:37:18 PM
Please respond to rittmann1 AT ibm DOT net @ internet
To: ADSM-L AT VM.MARIST DOT EDU @ internet
cc:
Subject: HP C1553A definition problem


Hi all,
I want to define a HP autochanger HP C1553A (6 DAT Carts) to an ADSM OS/2
V2.1 LVL 14 server.
The SCSI-dectect utility does not find the robotic as an seperat ID. I
always find only the drive. So Im not able to define the robotic with the
command "DEF LIBR XXXX LIBTYPE=SCSI DEIVE=auto04$"
The SCSI-ID 4 is the HP-Drive. How can I define the robotic unit?

Thank you,
Stephan



<Prev in Thread] Current Thread [Next in Thread>