Try upgrading your DLT 7000 microcode to level 60. It should take care of this 
problem



On Thu, 11 Dec 1997 17:23:20 +0100, Dirk Pohl wrote:

>Hi ADSM-ers with AIX
>
>we are installing an ADSM-Server on AIX and we see, that
>ADSM has no proper EOV-Processing. Am I dreaming or is this
>the real truth.
>
>Tape full >>> write error >>> tape is in error-state an no more
>useable/tape is not marked full
>
>On th other hand we are using an MVS-ADSM Server and I havent seen
>such a phaenomenon.
>
>11.12.1997 14:21:54      ANR8341I End-of-volume reached for DLT volume
>000008.
>11.12.1997 14:21:54      ANR1411W Access mode for volume 000008 now set to
>
>                          "read-only" due to write error.
>
>11.12.1997 14:21:54      ANR0523W Transaction failed for session 892 for
>node
>                          AAA.BBB.CCC (AIX) - error on output storage
>device.
>
>                   Volume Name: 000008
>             Storage Pool Name: TEST.PRIM.CART.ARC.POOL1
>             Device Class Name: DLT7000CLASS1
>       Estimated Capacity (MB): 123,322.8
>                         %Util: 74.6
>                 Volume Status: Filling
>                        Access: Read-Only
>        Pct. Reclaimable Space: 25.4
>               Scratch Volume?: Yes
>               In Error State?: Yes
>      Number of Writable Sides: 1
>       Number of Times Mounted: 769
>             Write Pass Number: 1
>     Approx. Date Last Written: 11.12.1997 13:35:49
>        Approx. Date Last Read: 11.12.1997 13:39:45
>           Date Became Pending:
>        Number of Write Errors: 1
>         Number of Read Errors: 0
>               Volume Location:
>Last Update by (administrator):
>         Last Update Date/Time: 21.11.1997 15:05:51
>
>
>Thanks for any help ....
>
>Regards
>D. Pohl
>V.I.S. Informationssysteme GmbH
>


Roger Stakkestad
IBM