Re: 3570 Tape setting up
1997-11-14 08:18:32
You may also have to specify the element address on the "def drive". In
our case the first drive was element 16 the second drive was element 17.
Randy
> -----Original Message-----
> From: Martin Kompf [SMTP:MKM AT PROXY.SYSDAT DOT DE]
> Sent: Friday, November 14, 1997 3:19 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: 3570 Tape setting up
>
> Somchai Tachapornroong (somchait AT th.ibm DOT com) wrote:
> >Anyone ever config 3570 Tape drive (2 drives) with ADSM. I don't
> know how
> to
> >config it (3570) library
> >Although I already install latest ATape driver.
>
> I assume that you run ADSM at a RS/6000 (AIX).
> After installing ATape and rebooting you get a new device
> /dev/rmt0.smc.
> (or /dev/rmt1.smc ...). This is the System Media Changer.
> You will get a /dev/rmt0 and a /dev/rmt1 for the two tape drives in
> the
> library.
> Check that the library is NOT in split mode!
> At the dsmadmc prompt you can now:
>
> def libr 3570lib libtype=scsi device=/dev/rmt0.smc
> def drive 3570lib 3570drive0 device=/dev/rmt0
> def drive 3570lib 3570drive1 device=/dev/rmt1
> def devc 3570class devtype=3570 library=3570lib mountlimit=2
>
> Hope that this will help you.
>
> --
> Martin Kompf
> mailto: mkm AT sysdat DOT de
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- 3570 Tape setting up, Somchai Tachapornroong
- Re: 3570 Tape setting up, Martin Kompf
- Re: 3570 Tape setting up,
Randy Hessey <=
- Re: 3570 Tape setting up, Ann Courchaine
- Re: 3570 Tape setting up, Michael Hagen
- Re: 3570 Tape setting up, Michael Hagen
- Re: 3570 Tape setting up, Ann Courchaine
- Re: 3570 Tape setting up, Somchai Tachapornroong
- Re: 3570 Tape setting up, Michael Hagen
- Re: 3570 Tape setting up, Mark Adams
- Re: 3570 Tape setting up, Mark Adams
- Re: 3570 Tape setting up, Mark Adams
|
|
|