Problems with ADSM and STK 9714
1997-08-25 10:24:09
Subject: |
Problems with ADSM and STK 9714 |
From: |
"Arndt-Kohlway, Chris" <CArndt AT LEGGMASON DOT COM> |
Date: |
Mon, 25 Aug 1997 10:24:09 -0400 |
>
>Hello -
> I have an ongoing problem with ADSM and our StorageTek 9714
>DLT tape library. I'm running ADSM v2r1 with PTF13 installed and
>everything works okay as long as we only run scheduled backups.
>When our users start issuing backup or archive ADSM commands
>on demand, the system appears to get confused and we start getting
>messages like the following:
>
>08/25/97 10:05:31 ANR8300E I/O error on library 9714 (OP=00006C03,
>CC=315,
> KEY=05, ASC=3B, ASCQ=0D, Description=The
>destination slot
> or drive was full in an attempt to move a volume).
>Refer
> to Appendix B in the 'Messages' manual for
>recommended
> action.
>
>
>I follow the instructions in the messages manual and clear the drive and
>audit the library. Everything runs fine for awhile and then it happens
>again.
>ADSM is the only software accessing the system and no one is manually
>moving the tapes, so it appears that ADSM is losing track of what is
>going on. This happens on all our drives and with a variety of tapes, so
>it doesn't appear to be a hardware problem.
>
>Any help would be greatly appreciated.
>
>Thanks -
>- Chris Arndt-Kohlway
>- (410) 454-3013
>
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- Problems with ADSM and STK 9714,
Arndt-Kohlway, Chris <=
|
|
|