ADSM-L

dlt7000 errors

1997-08-13 12:55:22
Subject: dlt7000 errors
From: Steven P Roder <tkssteve AT ACSU.BUFFALO DOT EDU>
Date: Wed, 13 Aug 1997 12:55:22 -0400
Hi All,

     I have two Quantum Engineers and one BreeceHill Engineer on site here
at UB (since yesterday).  Currently, we are monitoring volume audits with
a special device hooked to the drives, and are trying to characterize the
failures.  If anyone else that is having read or write problems to your
DLT7000's, and would like to share your error messages/situations with us,
that would be great.

If you see ADSM error messages like:

ANR8302E I/O error on drive Q7.1.2MT (/dev/rmt/2mt) (OP=READ, CC=305,KEY=03,
ASC=80, ASCQ=00, Description=Drive failure).  Refer to Appendix B in the
'Messages' manual for recommended action.

and could post them too, that would help.  (BTW, the above error (ASC=80,
ASCQ=00 is a calibration error).

Thanks,

Steve (unVMix Systems Programmer/Dude) Roder
(tkssteve AT ubvm.cc.buffalo DOT edu | tkssteve AT acsu.buffalo DOT edu | 
(716)645-3564 ,
   | http://ubvm.cc.buffalo.edu/~tkssteve)
<Prev in Thread] Current Thread [Next in Thread>
  • dlt7000 errors, Steven P Roder <=