Michael,

Atape 3.1.0.6.  2.1.0.6 is the required but 3.1.0.6 is newer.

Devtype info is in the README file.  If you don't have this get the one
from index.storsys.ibm.com/adsm/fixes/v2r1/aixsrv.

Only caution is for the 2 drive models B02,B12, make sure that you have
both drives on the same SCSI bus.

Other than that you can just follow the instructions in the 2.1.X.12
README file and that should get you through.

Any problems, re-post and I'll try and help.

Hope this helps

Dave


>Has anyone configured a Magastar MP 3570 Tape Subsystem running on
>an RS/6000 AIX 4.2 for use by ADSM?  The specific information I'm
>looking for include:
>
>Atape.driver number   (readme file says 2.6.1.0, support says 3.1.0.6)
>
>devtype (ie., DLT, Cartridge, 3590, etc.,)
>
>Any tips and cautions for configuration would be greatly appreciated.
>Regards,
>
>Michael Drees <drees AT binc DOT net>
>Berbee Information Networks Corp.
>N14 W23883 Stoneridge Drive
>Suite 170
>Waukesha, WI  53188
>414-523-5800 ext. 66 FAX: 414-523-5803
>


--
David Armes                     email : davida AT mailserver.aixssc.uk.ibm DOT 
com
David Armes                     email : davida AT mailserver.aixssc.uk.ibm DOT 
com
ADSM Technical Advisor          TEL   : 01705 499966
AIX-SSC  (AL11)                 FAX   : 01256 812709
"A Freudian slip is when you say one thing but mean your mother"