As a follow-up, Christo has informed me
that after applying fixpak 26, he's up
and running.

Barry Fruchtman
ADSM Development


On Mon, 12 May 1997, Sal Salak Juraj wrote:

> Christo,
>
> I do not know DLT4700,
> but I assume it will be similar to DAT libraries
> I tried.
>
> If  ADSMSDI displays the values correct,
> then you must have DLT connected to third SCSI controller
> (the numbering begins with 0)
> and both the autochanger and tape units configured
> to same SCSI ID 4.
>
> If this is true, chnage (using DLT manual) either the
> SCSI ID of autochanger or the SCSI ID of tape,
> and re-run ADSMSDI.
>
> If this is false, ADSMSDI displays wrong values,
> try to define your library using correct values.
> Assuming you have only one SCSI controller and
> autochanger configured to ID 6, and tape to ID 5,
> then correct values would be AUTO06$ and TAPE05$.
>
> I had probably similar observation - ADSMLDI pretended
> my changer AIWA D200 to be "unsupported by ADSM",
> but defining it with correct values worked well.
>
> Juraj Salak
>
>
>
> > Date:    Sat, 10 May 1997 13:15:21 +0200
> > From:    Christo Heuer <christoh AT ABSA.CO DOT ZA>
> > Subject: OS/2 adsm server + DLT4700
> >
> > >  Christo,
> > >    The device name for the library is AUTOxy$;  The device
> > > name for tape drives is TAPExw$.
> > > In the above x is for the SCSI adapter number starting at 0.
> > > y is the SCSI id of the autochanger.
> > > w is the SCSI id of the tape drive.
> > > You can run the ADSMSDI command to find these values.
> > >
> > > Barry Fruchtman
> > > ADSM Development
> >
> > I'm sending this to the list in case somebody else knows if this is correct.
> I
> > did as
> > Barry suggested but the output from the ADSMSDI command does not look right.
> >
> > The output says that the device name for the tape should be tape24$ and the
> > auto
> > changer auto24$. Has anyone got a DLT4700 - where would you set the
> > scsi I.D.'s
> >
> > to be different for the tape and the autoloader?
> >
> > TIA
> >
> > Christo Heuer
> > Johannesburg
> > South Africa
> > Christoh AT absa.co DOT za
>