Hi everyone

Our current configuration is as follows:
A 3494 with two 3590 drives
Data path       = SCSI
Control path    = RS232
Server          = Sun Sparc running Solaris 2.4
Adsm            = Version 1.2.1

I've been able to define the library and both drives to Adsm without any
problems..
When I try to do the checkin libvol command I get the following
messages:
q mount
ANR2034E QUERY MOUNT: No match found for this query.
adsm>
q drive

Library Name     Drive Name       Device Type     Device
Element
------------     ------------     -----------     ----------------
-------
-------
STORAGE0         DRIVE1           3590            /dev/rmt/1st
STORAGE0         DRIVE1           3590            /dev/rmt/1st

STORAGE0         DRIVE2           3590            /dev/rmt/2st


adsm>
checkin libvol storage0 status=privat search=yes
ANR8422I CHECKIN LIBVOLUME: Operation for library STORAGE0 started as
process
3.
adsm>
ANR8447E No drives are currently available in library STORAGE0.
ANR8431I CHECKIN LIBVOLUME process completed for library STORAGE0; 0
volume(s)
found

The devclass has got a mountlimit of 2 and there are no tapes mounted on
the drive.

Is there anything we are overlooking?
We are getting slightly desperate as we have to give a demo next
week!!!!

Thanks
Christo
christoh AT transnet.co DOT za