Randy...

Thanks for the tips..... worked wonders!

BTW, my original problem was windows freezing.

Thanks again.

...Tom Hughes

>Message authorized by:
>    : thughes AT CAMAIL2.HARVARD DOT EDU@INTERNET at #EMAIL
>
>     If you get blown out to a dos prompt when you involk it.
>
>     and you use a 3com card (3c5x9 like I had) running on a novell
>
>     network.  you may need to get new 3com and novell modules .com .exe.
>
>     for me it was a new 3c5x9, lsl, vlm and ipxodi.  You can get the
>
>     updates out from the websites of the novell and 3com vendors.
>
>     good luck,
>
>     Randy Korinko
>
>     Motorola
>
>
>______________________________ Reply Separator
>_________________________________
>Subject: WFW-PCTCP3.0-ADSM2.1.03
>Author:  ADSM-L AT VM.MARIST DOT EDU@INTERNET at #EMAIL
>Date:    7/30/96 3:41 pm
>
>
>Does anyone have the following config working:
>
>  ADSM Windows Client V2 R1 LVL0.3
>
>  Windows for Workgroups (3.11?)
>
>  FTP Inc PCTCP V3.0
>
>  - minimumcopyspace set to 32 in the pctcp.ini file
>
>Cannot get this to work on an HP Vectra/133. Are there known
>problems with this combination?
>
>TIA
>
>...Tom Hughes