> I did untar the tape, and it has a lot of files, however, none of them
> is an image file.
> The initial directories are IBMADSM & catalog, and both of these have
> sub directories under them.  I did a 'find . -name "*image*"  -print '
> command and didn't get anything back.

Actually, this sounds like a depot format.  Did you try putting the
tape in the drive and giving swinstall /dev/rmt/0m as the depot location?


>
> I'm still stuck.
>
> Elvin Peterson
> ----------
> From: ADSM-L(a)VM.MARIST.EDU; alan(a)ERNEST.ITG.TI.COM
> To: ADSM-L(a)VM.MARIST.EDU
> Subject: Re: FW: HPUX 10.0 Client Install
> Date: Wednesday, July 17, 1996 9:17AM
>
> If you untar the tape, there is probably three files on it (just
> like the FTP site).  One of the files is *.image.  That's the
> swinstall image you give to swinstall when entering the install
> source.
>
> >
> > ----------
> > From: Peterson, Elvin Jr.
> > To: listserv(a)vm.marist.edu
> > Subject: HPUX 10.0 Client Install
> > Date: Wednesday, July 17, 1996 8:57AM
> >
> > Because I was unsuccessful in trying to download the PTF (IP20824) for
> > the ADSM HPUX 10.0 client, I had it sent to me on tape.  The problem
> > that I'm having is that the tape is in tar file format, and all of the
> > install instructions I see mention image file format only. What do I
> > have to do to install the HPUX client if it's in the tar file format?
> >
>
>
> --
> Alan Edmonds, KB5ZUY                          Texas Instruments, Inc.
> System Administrator, Composer Development    M/S 8515
> Phone: +1-214-575-6427                        6620 Chase Oaks Blvd.
> Email: Alan.Edmonds AT ti DOT com                    Plano, TX, USA  75023
>


--
Alan Edmonds, KB5ZUY                          Texas Instruments, Inc.
Alan Edmonds, KB5ZUY                          Texas Instruments, Inc.
System Administrator, Composer Development    M/S 8515
Phone: +1-214-575-6427                        6620 Chase Oaks Blvd.
Email: Alan.Edmonds AT ti DOT com                    Plano, TX, USA  75023