|
RS/600: /dev/rmt* and /dev/smc0 keep popping up after reboot!
1996-04-16 07:26:20
|
Subject: |
RS/600: /dev/rmt* and /dev/smc0 keep popping up after reboot! |
|
From: |
Rita Groothuizen <M.M.Groothuizen AT RC.RUG DOT NL> |
|
Date: |
Tue, 16 Apr 1996 12:26:20 GMT+0100 |
We work on a RS/6000 and have a 7331-tapelibrary with two
tape-drives. The tape-devices were originally configured on AIX as:
/dev/smc0 tape-library
/dev/rmt0 /dev/rmt1 tape-drives
With ADSM the devices are configured as:
/dev/lb0 tape-library
/dev/mt0 /dev/mt1 tape-drives
We removed the definitions for smc0 and rmt* out of AIX using smit.
When we reboot, the AIX-devices pop up again. When we run
"diag" the ADSM-devices seem not to be configured.
But when we look at the devices: AIX- AND ADSM-devices are available
at the same scsi-address AND usable!!!!!
Any ideas?
Rita Groothuizen
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sender: Rita Groothuizen E-mail: M.M.Groothuizen AT rc.rug DOT nl
Telefoon: 050-633381
|
| <Prev in Thread] |
Current Thread |
[Next in Thread> |
- RS/600: /dev/rmt* and /dev/smc0 keep popping up after reboot!,
Rita Groothuizen <=
|
|
|
