ADSM-L

How to move volumes from a EXB10e to a IBM 7331-205

1996-03-06 10:15:22
Subject: How to move volumes from a EXB10e to a IBM 7331-205
From: Klaere Cassirer <Klaere.Cassirer AT GMD DOT DE>
Date: Wed, 6 Mar 1996 16:15:22 +0100
We are running ADSM V2.1 on AIX 3.2.5.

The tape drive in our Exabyte EXB10e library medium changer is defect and the
 volumes in the library are not readable by this device anymore.

Our question is how to move and read the volumes from an IBM 7331 - 205
mediumchanger. We configured the new device and are able to do the library
operations like audit library, but the device cannot read the tapes. Doing
AUDIT LIBRARY the following error occurs for each tape:

  03/06/1996 15:28:56  ANR8457I AUDIT LIBRARY: Operation for library EXB10ELIB
                      started as process 8.
  03/06/1996 15:30:06  ANR8302E I/O error on drive EXB10EDRIVE (/dev/mt0)
                      (OP=READ, CC=305, KEY=04, ASC=44, ASCQ=00).

We tried to do a restore of a file on one volume, but the operation failed
with the same error as above.

Any hints are highly appreciated.


Klaere Cassirer                     GMD - Forschungszentrum Informationstechnik
                Institut fuer Algorithmen und wissenschaftliches Rechnen (SCAI)
                            Schloss Birlinghoven, 53754 Sankt Augustin, Germany
e-mail: cassirer AT gmd DOT de                                   Tel.: +49 2241 
142758
<Prev in Thread] Current Thread [Next in Thread>
  • How to move volumes from a EXB10e to a IBM 7331-205, Klaere Cassirer <=