You have to be missing a pre-req somewhere or else the vendor MIBs do not go all the way back to .1.3.6.1.4.1 to define the enterprise OID.
I'd open a PMR to support and get personalized help.
PS: There are never any circumstances which would require you to concatenate RFC1213. All those definitions are built into the product. That's where mib2trap starts.
James
_________________________________
James Shanks
Tivoli Network Availability Management
Network Availability Management -- Level 3
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
Larry Fagan ---08/18/2009 11:02:47 AM---Hi, I need some help. I'm on NV 7.1.4 FP5 on AIX.
From:
Larry Fagan <larrytechie AT yahoo DOT com>
To:
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
Date:
08/18/2009 11:02 AM
Subject:
[NV-L] Mib2trap - NetApp.mib Help
Sent by:
nv-l-bounces AT lists.ca.ibm DOT com
Hi,
I need some help. I'm on NV 7.1.4 FP5 on AIX.
I'm trying to compile network appliance MIB (netapp.mib). When i do a mib2trap on netapp.mib, i'm not getting any OIDs in the script. I also concatenated RFC1213-MIB,SNMP-SMI-MIB and netapp.mib into file. Still no success.
Any ideas why?
Thanks in advance.
Larry
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
