nv-l

Re: [NV-L] Mib2trap help

2009-04-13 18:49:51
Subject: Re: [NV-L] Mib2trap help
From: Leslie Clark <lclark AT us.ibm DOT com>
To: Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
Date: Mon, 13 Apr 2009 18:49:33 -0400

James, does he have to remove the ^M things from the file? Or are they supported now? This is on AIX, I think.

Cordially,

Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager



James Shanks/Raleigh/IBM@IBMUS
Sent by: nv-l-bounces AT lists.ca.ibm DOT com

04/13/2009 05:23 PM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>

To
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
cc
Subject
Re: [NV-L] Mib2trap help





Remove RFC 1212 from your concatenation. It is not needed and cannot be parsed any way. Ditto with RFC 1155.

These RFC's contain macros which define the basic parts of the MIB tree. And macros cannot be parsed by mib2trap. It will not let you re-define it components, only use them. Generally speaking no RFC lower than 1213, which defines MIB-II, can be or needs to be included in your concatenation.

James Shanks
Tivoli Network Availability Management Level Three
Network Availability Management
Tivoli Software, IBM Corp
1-919-224-1642 | T/L 687-1642 | ITN 26871642
Inactive hide details for "Sperry, Kevin" <Kevin.Sperry AT us.ngrid DOT com>"Sperry, Kevin" <Kevin.Sperry AT us.ngrid DOT com>

"Sperry, Kevin" <Kevin.Sperry AT us.ngrid DOT com>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com

04/13/2009 05:09 PM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>



To

"Tivoli NetView Discussions" <nv-l AT lists.ca.ibm DOT com>

cc

Subject

[NV-L] Mib2trap help


Hello again,

With NetView 7.1.5 on UNIX, trying to run mib2trap on concatenated file. I am receiving the following…

# mib2trap CISCO-PORT-STORM-CONTROL-MIB.in CISCO-PORT-STORM-CONTROL-MIB.sh
Errors - no script generated.

Bad format for OBJECT TYPE(END): On or around line 2941

Bad parse of OBJECT-TYPE: On or around line 2941

Not sure why the error. Below is part of the file. RFC-1212 ends at line 2941.

+2938 -- ipAddress^M
+2939 -- IpAddress^M

+2940 -- }^M

+2941 END

+2942 RFC1155-SMI DEFINITIONS ::= BEGIN

+2943

+2944 EXPORTS -- EVERYTHING

+2945 internet, directory, mgmt,

+2946 experimental, private, enterprises,

Any help or documents would be greatly appreciated.

Thank you,


Kevin Sperry
IT Analyst, Data Center Monitoring Control

nationalgrid

7437 Henry Clay Blvd. Bldg#3

Liverpool, NY 13088

Phone: (315) 460-2688 Internal: 829-2688

Kevin.Sperry AT us.ngrid DOT com

********************************************************************************
This e-mail and any files transmitted with it, are confidential to National Grid and are intended solely for the use of the individual or entity to whom they are addressed.  If you have received this e-mail in error, please reply to this message and let the sender know.
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com

http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)

_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)
<Prev in Thread] Current Thread [Next in Thread>