Re: [NV-L] NV-L bandwidth utilization for an L3 switch
2007-04-04 05:50:15
OK you are ready to collect data from
the switch. What about the second half of my instructions on how
to enable the collection? Is the switch in the Routers smartset If
not, did you add to the Bandwidth Utilization data collection and
set ti to "To be collected" status?
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
durga priya <durgapriya_cse AT yahoo DOT com>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
04/04/2007 02:59 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| nv-l AT lists.ca.ibm DOT com
|
cc
|
|
Subject
| [NV-L] NV-L |
|
Dear sir,
As per james shanks's instruction
regarding bandwidth utilization ,mib data is collected as follows
for a L3 switch .
Time
MIB
Node
Instance Value
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 3
0.01
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 1
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 9
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 8
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 7
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 6
0.00
04/04/2007 09:58:59 AM BandwidthUtilHdx
172.16.0.119 16
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 4
0.00
04/04/2007 10:03:59 AM BandwidthUtilHdx
172.16.0.119 15
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 2
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 14
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 13
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 12
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 11
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 10
0.00
04/04/2007 09:58:58 AM BandwidthUtilHdx
172.16.0.119 5
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 14
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 8
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 7
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 6
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 5
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 4
0.00
04/04/2007 09:58:59 AM BandwidthUtilHdx
172.16.0.119 15
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 2
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 9
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 13
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 12
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 11
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 10
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 1
0.00
04/04/2007 10:03:59 AM BandwidthUtilHdx
172.16.0.119 16
0.00
04/04/2007 10:03:58 AM BandwidthUtilHdx
172.16.0.119 3
0.01
the demand poll for the L3 switch is displayed as follows
Demand Poll - 172.16.0.119 - Tivoli NetView
Name or IP Address: 172.16.0.119
Poll Results
10:15:44 AM***** Starting Demand Poll of node 172.16.0.119.
*****
10:15:44 AMCurrent status:
10:15:44 AM Interface 172.16.0.119 (up)
10:15:44 AM Interface 10.10.2.1 (down since
03/27/2007 01:41:21 PM)
10:15:44 AM Interface 172.16.0.119(Vlan1) is Up Responded
to ping
10:15:55 AM Interface 10.10.2.1(Vlan3) is Down Timed Out
10:15:55 AM Current Polling parameters
10:15:55 AM The next Node Configuration Poll
is scheduled for 04/05/2007 12:01:35 AM.
10:15:55 AM The next New Node Poll is scheduled
for 04/04/2007 11:13:17 AM.
10:15:55 AM Get system identifier
10:15:55 AM Get system description
10:15:55 AM Get system name
10:15:55 AM Get IP forwarding status
10:15:55 AM Get IP address table
10:15:55 AM Get number of interfaces
10:15:55 AM Get interfaces table
10:15:55 AM Interface GigabitEthernet0/1
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/2
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/3
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/4
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/5
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/6
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/7
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/8
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/9
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/10
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/11
does not have an IP Address.
10:15:55 AM Interface GigabitEthernet0/12
does not have an IP Address.
10:15:55 AM Interface Vlan2 does not have
an IP Address.
10:15:55 AM Get ARP table for discovering secondary
interfaces
10:15:55 AM Get default routing entry
10:15:55 AM Get extended interfaces table
10:15:55 AM Get system location
10:15:55 AM Get system contact
10:15:55 AM Get IpNetToMedia Table
10:15:55 AM Verify node name
10:15:59 AM No node name was found.
10:15:59 AM***** End of Demand Poll for node 172.16.0.119.
*****
How to proceed further to utilize the bandwidth?Is
the above collected data correct.
I want to configure L3 switch for bandwidth utilization
using tivoli netview 7.1.4 for windows 2000 professional.How to do?
please reply as early as possible......
waiting for ur reply....
bye..
durga
Never
miss an email again!
Yahoo! Toolbar alerts you the instant new Mail
arrives.
Check it out._______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|