It is not normal for trapd to be restarted if you configure traps from xnmtrap.

But you will have to provide more information about what exactly you are doing to reconfigure the daemons for a more complete answer.

It is normal, however, that if trapd is stopped, then other daemons, particularly netmon, snmpCollect, ovtopmd, and nvcorrd will be stopped as well because they are dependent on trapd for normal functioning. And others like nvserverd will stop if nvcorrd does. So if from Server Setup you restart trapd, many of the other daemons will also be restarted.



James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
Paulo Alex Dariva <dariva AT digitro.com DOT br>

Paulo Alex Dariva <dariva AT digitro.com DOT br> Sent by: nv-l-bounces AT lists.ca.ibm DOT com 02/11/2007 08:22 PM Please respond to Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>

To NV-L AT lists.ca.ibm DOT com cc Subject [NV-L] Netview restart deamons

Hi All,
I have a Netview: 7.1.4 (FixPack 4) running on RedHat AS 3.4 OS.
The system has a behavior that I would like to know if is normal. When I configure new trap or modify the configuration of forward of traps, snmpcolect deamon is restarted. Is this normal?
Actually, any configuration that I modified makes with that all deamons to be restarted. This is correct?

Thanks
--


Paulo Alex Dariva
Gerente
LAB - PSN - Produtos e Serviços Networking

DÍGITRO TECNOLOGIA
E-mail: paulo.dariva AT digitro.com DOT br
Fone: +55 48 3281-7124 / +55 48 3281-7000
Fax: +55 48 3281-7299
Site: www.digitro.com _______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to internal IBM'ers only)