RE: [NV-L] Some systems dont get added to the submap.
2006-09-20 10:07:07
Rajesh, no one wants to discourage you
from taking advantage of the programming interface, but I for one would
just like to be sure you know about the alternatives that have led to those
APIs being less used than they used to be. My apologies if you know all
this already.
If you are only trying to represent
those hosts from different subnets in a common submap, then a Smartset
based on the field "EServer_sysName ~ ." (it exists), will give
you that. The Smartset editor is under Tools. Things in the Smartsets remain
managed by netmon and ipmap.
If however you intend to also write
a management application that is going to manipulate their status, then
you may have a reason to go to the trouble of developing a topology using
the APIs.
Cordially,
Leslie A. Clark
IT Services Specialist, Network Mgmt
Information Technology Services Americas
IBM Global Services
(248) 552-4968 Voicemail, Fax, Pager
Greg Keetch <gkeetch AT ca.ibm DOT com>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
09/20/2006 09:21 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
|
cc
|
|
Subject
| RE: [NV-L] Some systems dont get added
to the submap. |
|
Rajesh,
It looks like you the condition (pObjectIdList->count > 0) is returning
false for some of the systems because there are no matches for the
conditions you are searching for (field EServer_sysName = workstationname
?). This may be due to a hidden character in the field data (space),
character case, etc. so I would double check the field values in the DB.
Based on the documentation for OVwDBListObjectsByFieldValue, if no match
was found that the OVwObjectIdList will contain no object IDs and still
be
considered successful.
I'm not sure if this could help you, but maybe you could achieve what you
need by using the location.conf file or a smartset.
Regards,
Greg Keetch
IT Specialist (Advisor), Network Services
Network Management Tools Specialist
Information Technology Services Americas (ITSA), Global Services, IBM
Canada
"Lakka, Rajesh
Kumar"
<Rajesh.Lakka@in.
To
unisys.com>
"Tivoli NetView Discussions"
Sent by:
<nv-l AT lists.ca.ibm DOT com>
nv-l-bounces@list
cc
s.ca.ibm.com
Subject
RE: [NV-L]
Some systems dont get
09/20/2006 03:09
added to the submap.
AM
Please respond to
Tivoli NetView
Discussions
<nv-l AT lists.ca DOT ib
m.com>
Jane,
Sorry I did not mention anything in the subject line of the mail
earlier.
The earlier mail which I sent in html format failed to reach nv-list
because it was 60 KB and I had to switch to plain text format.
In the scenario I am using there will be certain systems with our SNMP
MIB running on them. We need display them on the console using our own
submap representation. The submap is created perfectly but some of its
components fail to add.
The problem is that
1. Some systems are not getting added to the submap. They fail to add
when pObjectIdList->count > 0 is false.
2.I want to know why the condition (pObjectIdList->count > 0) is
becoming false for some systems (ie pObjectIdList->count is 0 instead
of
being 1).
Thanks,
Rajesh
-----Original Message-----
From: nv-l-bounces AT lists.ca.ibm DOT com
[mailto:nv-l-bounces AT lists.ca.ibm DOT com] On Behalf Of Jane Curry
Sent: Wednesday, September 20, 2006 3:22 PM
To: Tivoli NetView Discussions
Subject: Re: [NV-L] (no subject)
Hi Rajesh,
Perhaps you might explain a bit at a higher level, what you are trying
to achieve? Most people who use NetView do not need to resort to
programming with the APIs. Perhaps there is an easier way of achieving
what you want??
Cheers,
Jane
Lakka, Rajesh Kumar wrote:
> Dear NetView experts and group members,
> My name is Rajesh. I am facing a peculiar problem here. I am
developing a connector program for the Tivoli NetView 7.1.4
> I am having 5 systems (computers) in the same network segment or
different.
> Let us say the hostnames of the 5 systems are as follows:
> Work Station 1
> Work Station 2
> Work Station 3
> Work Station 4
> Work Station 5
> All these 5 systems are discovered by netview and their nodes are
displayed on the console.
> I create a submap in my own function :
> CreateESubmap (){
> int nnodes;
> ........
> ........
> symbolId = OVwCreateSymbolBySelectionName
(OVwGetMapInfo(),pSymbolList->symbols[i].submap_id,SubmapName,"Network:c
pEServer",submapName,ovwNormalStatus,ovwCompoundStatusSource,
NULL, ovwMergeDefaultCapabilities);
> objectId = OVwDbSelectionNameToObjectId (submapName);
> submapId = OVwCreateSubmap
(OVwGetMapInfo(),objectId,ovwSharedSubmap,ovwNoSubmapType,submapName,ovw
BusLayout,ovwNoSubmapFlags);
> //WHEN THE CODE REACHES HERE I CAN SEE THE SUBMAP IMAGE WITH THE NAME
submapName IS SHOWN IN THE CONSOLE.
> //Now I want to add symbols to the submap which is already created.
> //I try to add these work stations to the submapName.Now I try
> //to add all these 5 Work Stations to the submap.
> //One Workstation at a time in this for loop
> for(int i=0;i<4;i++){
> If(addcomponenttosubmap(submapid,objectId,workstation))
> {
> nnodes=nnodes+1
> }
> }
> The implementation of addcomponenttosubmap is illustrated below.
> bool CNV_ESDiscoveryDlg::AddComponentToSubmap(OVwSubmapId submapId,
CString Component)
> {
> bool bComponentAdded
= false;
> int
i;
> LogMessage ("\nAddComponentToSubmap
: Entrance");
> OVwObjectId
objectId;
> OVwObjectIdList
* pObjectIdList;
> OVwObjectInfo
* pObjectInfo;
> OVwSymbolId
symbolId;
> OVwFieldBinding
* pFieldValue;
> char
nodeName[256];
> CString
ComponentName;
> ComponentName = Component;
> ComponentName.MakeUpper
();
> for (i = 0; i < MAX_OBJECTS;
i++) {
>
m_objectList[i] = ovwNullObjectId;
> }
> pFieldValue = new OVwFieldBinding;
> pFieldValue->field_val
= new OVwFieldValue;
> pFieldValue->field_id
=
OVwDbFieldNameToFieldId("EServer_sysName");
> pFieldValue->field_val->is_list
= FALSE;
> pFieldValue->field_val->field_type
= ovwStringField;
> pFieldValue->field_val->un.string_val
=
ComponentName.GetBuffer(1);
> pObjectIdList = OVwDbListObjectsByFieldValue(pFieldValue);
> LogError("AddComponentTosubmap
:
OvwDbListObjectsByFieldValue");
>
> if (pObjectIdList != NULL)
{
>
>
LogMessage ("Object list != NULL");
>
LogValue ("Object count",
pObjectIdList->count);
>
>
if (pObjectIdList->count > 0) {
>
objectId =
pObjectIdList->object_ids[0];
>
>
pObjectInfo = OVwGetObjectInfo
(OVwGetMapInfo(), objectId);
>
symbolId = OVwCreateSymbol
(OVwGetMapInfo(),submapId, objectId,
>
"Computer:WinNT",nodeName,ovwNormalStatus,ovwCompoundStatusSource,
>
NULL,ovwMergeDefaultCapabilities);
>
if (symbolId != ovwNullSymbolId) {
>
bComponentAdded = true;
>
//MessageBox(" MCP Componment Added ");
>
//MessageBox(nodeName);
>
}
>
else {
>
LogError ("AddComponentToSubmap OVwCreate Symbol");
>
}
>
>
}
> }
> delete pFieldValue->field_val;
> delete pFieldValue;
> return bComponentAdded;
> } // AddComponentToSubmap
>
> The problem I face is that a symbol gets added to the submap only
when
pObjectIdList->count > 0 is true only for WorkStation 2 and WorkStation
5. I can see these symbols under the submapName.
> But for WorkStation 1 WorkStation 3 and WorkStation 4 the
pObjectIdList->count > 0 is false so nothing gets added to the
submapName.
>
> Even though all the workstations are in the same network segment I
am
getting this problem.
>
> If I put a OVwErrorMsg(OVwError()) after pObjectIdList =
OVwDbListObjectsByFieldValue(pFieldValue) always I get the message
"success "for all the 5 workstations. But after this
pObjectIdList->count > 0 is false for WorkStation 1 WorkStation 3
and
WorkStation 4.
>
>
> Why pObjectIdList->count > 0 is false for WorkStation 1 WorkStation
3
and WorkStation 4?
>
> Waiting for your response,
> Thanking you,
> Rajesh
>
> _______________________________________________
> NV-L mailing list
> NV-L AT lists.ca.ibm DOT com
> Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited
to internal IBM'ers only)
>
--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2006 Jane Curry <jane.curry AT skills-1st.co DOT uk>. All
rights
reserved.
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|