Re: [nv-l] automation of add,delete, change activities
2004-10-01 08:10:15
Just a clarification: there is a difference
between configuration polling and new node discovery polling. You can turn
off new node discovery polling, and add nodes as directed by your change
control process, and allow configuration polling to discovery new interfaces
on existing devices. In some cases it will also remove interfaces that
no longer exist in the interface tables of the device. That depends on
whether there is an S flag in the oid_to_type file for that kind of device.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
Stephen Hochstetler/Austin/IBM@IBMUS
Sent by: owner-nv-l AT lists.us.ibm DOT com
10/01/2004 07:15 AM
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
|
|
Subject
| Re: [nv-l] automation of
add,delete, change activities |
|
Thorsten,
I helped setup an environment that needed this function a number of years
ago. I can talk about it in general terms.
1 -- doing a config poll is still VERY IMPORTANT. Don't let people tell
you that you should not do this. If this is true, then you have lost much
of the power of NetView. You will end up with many 'islands' of nodes in
your view. It is better to discover all the interfaces on a device and
unmanage the interfaces that you do not wish to monitor.
1 (part b) NetView generates a trap every time a new interfaces is discovered.
You can log those to see if new interfaces should be managed. Some automation
is possible with scripts too to see if the change is ok. If not ok, then
have script unmanage the interface.
2 -- you need a 'database' of nodes with IP addresses that you will be
managing. This database needs to be able to generate a list of IP addresses
and node names to discover/manage....as well as be able to generate a list
of managed IP addresses (all interfaces). Then you can do the following:
a) take the list of IP addresses and node names and update your DNS (hopefully
running on your NetView server)
b) the the list of IP addresses and node names and use 'loadhosts' to discover
them. (via a script that does a demandpoll right away)
c) either manually or via a script verify the interfaces on those new nodes
are just those you want to manage. Unmanage any interface you need to.
d) run another script that takes your NetView database and generates DNS
zone files for the IP addr to name mapping. This gives EVERY IP address
in your NetView a DNS name. But you want to leave your name to IP Adress
lookup to remain one IP address. (should be the IP interface on node that
you are doing management through).
3 - For the delete process, I still think it is best to have a person do
this using the map. NetView will do its own cleanup after a period of time,
but usually you want it done before that.
Stephen Hochstetler shochste AT us.ibm DOT com
International Technical Support Organization at IBM
Office - 512-838-6198 (t/l 678) FAX - 512-838-6931
http://www.redbooks.ibm.com
|
|
|