nv-l

Re: [nv-l] MLM functionality in 7.1.4

2004-08-18 14:16:19
Subject: Re: [nv-l] MLM functionality in 7.1.4
From: "Christopher J Petrina" <cjp8 AT meadwestvaco DOT com>
To: nv-l AT lists.us.ibm DOT com
Date: Wed, 18 Aug 2004 13:54:44 -0400

Currently have a PMR opened asking for clarification and verification that the IY29719 issue does not apply to the UNIX MLM.   If it does not then I can look into whether or not the MLM provides all the functionality I require to deem it a feasible implementation to use.  

Thank you
Chris Petrina



Stephen Hochstetler <shochste AT us.ibm DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com

08/18/2004 11:23 AM
Please respond to
nv-l AT lists.us.ibm DOT com

To
nv-l AT lists.us.ibm DOT com
cc
Subject
Re: [nv-l] MLM functionality in 7.1.4





While the MLM code for Windows and Unix is unique, the administration of the two is very close. You can use APM or the MLM management GUI at the Unix server to manage both MLMs the same way. There is documentation about a few things that are different such as the functions you can use in a MIB value calculation. But generally, the administration is the same. If you deploy MLMs, I recommend that you deploy all of them on Unix or all of them on Windows so that the differences don't bite you later.

Stephen Hochstetler shochste AT us.ibm DOT com
International Technical Support Organization at IBM
Office - 512-838-6198 (t/l 678) FAX - 512-838-6931

http://www.redbooks.ibm.com
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________

This electronic message contains information from MeadWestvaco
Corporation or subsidiary companies, which may be confidential,
privileged or otherwise protected from disclosure. The
information is intended to be used solely by the recipient(s)
named. If you are not an intended recipient, be aware that
any review, disclosure, copying, distribution or use of this
transmission or its contents is prohibited. If you have
received this transmission in error, please notify MeadWestvaco
immediately at postmaster AT MeadWestvaco DOT com.
_______________________________________________________________________
<Prev in Thread] Current Thread [Next in Thread>