Scott,

Would the attached files get you on your way?  With the FastT it seems
that it is dependent on the version of Storage Manager running.  Here's
a link to the Storage Manager.

http://www-1.ibm.com/servers/storage/support/fastt/fastt700.html

I downloaded the 8.3 AIX version and in the extracted files is the MIB
(sm84_205.mib). The attached (sm84_205.sh) is simply the mib2trap
output.  As you can see, there is not much there.

Hope it helps.

Mahesh

On Fri, 2004-06-18 at 09:36, Barr, Scott wrote:
> Greetings. Someone snuck up behind me and installed an IBM FASTt700
> and comitted it to production. Now that it's running in production, I
> have no way to generate traps in order to look at what that device
> sends in to NetView. We haven't had any failures, and the
> administrators have no clue on what traps this thing sends.
>  
> Does anyone have one in their network that could scrape traps out of
> trapd.log so I could see some examples? I have already seen the "test
> alert" and have a working automation skeleton but I sure would like to
> see the actual traps from a real problem.
-- 
Mahesh Tailor
WAN/TSM/NetView Administrator
Carilion Health System
Information Services
37 Reserve Avenue
Roanoke, VA 24016
Phone: 540.224.3929
Fax: 540.224.3954

sm84_205.mib
Description: Text document

sm84_205.sh
Description: Text Data