Alejandro,

take a look at "wteuiapp6" published in the redbook:
SG24-4515 Examples Using NetView for AIX Version 4
(get the redbook from www.redbooks.ibm.com)
You can still get the code (contributions) from here:
ftp://www.redbooks.ibm.com/redbooks/SG244515/
Rather old but very interesting stuff which should still work with NetView 
7.x.
At least after recompiling.

Oliver



alejandro.gabay AT reuters DOT com 
Sent by: owner-nv-l AT lists.us.ibm DOT com
27.05.2004 10:07
Please respond to
nv-l


To
nv-l AT lists.us.ibm DOT com
cc

Subject
Re: [nv-l] Netview - Adding symbols from command lind







Oliver.
I would like to add symbols (interfaces) that will be controlled by 
another application though the snmptraps events (using the Netview trap 
58916871.
Therefore this application has to add icons (symbols) before sending the 
traps.
I looked on the /ust/OV/prg_samples/ovw_examples/app1 and try to compile 
it but some files were missing (studio.h , string.h, ovw_types.h).
I thought that app1 might be a good example of building my own 
application. Do you have an idea of what might be going wrong?.


B. Regards
Alejandro Gabay



  
                      Oliver Bruchhaeuser   
                      <oliver.bruchhaeuser@        To: 
nv-l AT lists.us.ibm DOT com 
                      de.ibm.com>                  cc:   
                      Sent by:                     Subject:  Re: [nv-l] 
Netview - Adding symbols from command 
                      owner-nv-l AT lists DOT us.i         lind    
                      bm.com  
                                                   Header:        Internal 
Use 
                                                    Only    
                      27/05/2004 05:22  
                      Please respond to   
                      nv-l  
  
  





what kind of symbols do you want to add?
Can you give a better description?

Oliver


               
 alejandro.gabay AT reuters DOT com                              
 Sent by: owner-nv-l AT lists.us.ibm DOT com                                    
  
   
                                                   To 
                                        nv-l AT lists.us.ibm DOT com            
  
       
 26.05.2004 11:10                             cc 
               
                                              Subject 
                                         Please respond to                 
                                          [nv-l] Netview - Adding symbols 
from command lind           
                                               nv-l                        
       
               
               
               
               
               
               






Hello All,
We are running netview 7.1.3 (soon 7.1.4) on Solaris 8. We need to create 
symbols from the command line, Have anyone did it before?. Is there any 
examples of an application that adds or deletes map symbols?.

Your help will be greatly appreciated.

B. Regards
Alejandro Gabay
Technical Center Supervisor, Argentina
Reuters Ltd.




-----------------------------------------------------------------
       Visit our Internet site at http://www.reuters.com

Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.









-----------------------------------------------------------------
        Visit our Internet site at http://www.reuters.com

Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.