Re: [nv-l] NV 714 installation error
2004-04-23 18:09:29
Mario,
Your AIX system has ulimit for nofiles
(ulimit -n) set too high. Change it to 32767.
Since you are in a Framework environment,
you must reboot after changing ulimit for nofiles (ulimit -n).
How to do this: <backup files
before you change them>
You need to change the default ulimit
for nofiles (ulimit -n) for root.
This is in file /etc/security/limits
<see the comments within the file>
After saving that file, telnet or other
login to the machine as root to check. After logging in, issue
the "ulimit -a" command. nofiles
should be 32767 (as changed in /etc/security/limits).
If still unlimited, check profile and
shell rc files, etc.
After you have caused root default ulimit
for nofiles to be 32767 and proven it is true by the login test,
reboot.
Then as the other information instructs,
clean up the installation using the uninstall script on the cdrom.
Install. again.
Regards,
Geo.
George deSocio
IBM Americas Support - Distributed Network Management
Dept 46-E1ZA
IBM B660 CC102
HWY 54 & 600 Park Offices
Research Triangle Park, NC 27709
919-254-2259 (T/L 444) Fax: 919-543-7936 (T/L 441)
E-Mail: desocio AT us.ibm DOT com
Expand your IBM Tivoli product knowledge by participating in Support Technical
Exchange:
http://www-3.ibm.com/software/sysmgmt/products/support/supp_tech_exch.html
Mario Behring <mariobehring AT yahoo DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
04/23/2004 03:41 PM
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
|
|
Subject
| [nv-l] NV 714 installation
error |
|
Hi list,
During a NetView 7.1.4 for AIX fresh install through Framework 4.1.1 at
an
AIX 5.2 box I got the following error message:
Something went wrong:
Media Packet: "/mnt/cdrom/FILE33.PKT"
tvnmcnvq:FAILED (soft error)
Failure: the last few lines of the error log
(/tmp/NVS_714_NVFCONF_after.error):
+ echo Please check the log file /tmp/update.log for more details about
the errors.
+ 1>& 2
Please check the log file /tmp/update.log for more details about the
errors.
+ echo Then run the uninstnv script on the NetView cdrom to uninstall
NetView,
+ 1>& 2
Then run the uninstnv script on the NetView cdrom to uninstall NetView,
+ echo fix the errors and reinstall again.
+ 1>& 2
fix the errors and reinstall again.
+ exit 1
Completed (with errors).
All pre-requisites are installed, including the Tivoli NetView Framework
Patch 7.1, both on the TMR and on the ManagedNode that will be the NV
Server. The /tmp/update.log file (mentioned above) has the following
output:
D/N: GC23-4482-06
P/N: CT11VML
Fri Apr 23 13:31:07 EDT 2004
Initializing the Tracing and Logging...
Done.
======= Fri Apr 23 13:31:10 EDT 2004 BEGINNING NVCONFIGURE
* Running customize script for fileset OVMIN-LICENSE.
* Making links....
* Running customize script for fileset OVMIN.
* Making links....
* Running customize script for fileset OVWIN.
NOTE: Linking security support for nvsecd daemon.
NOTE: Configuring ovwdb
NOTE: Configuring nvsecd
NOTE: Starting nvsecd
ovstart: unable to contact ovspmd: No such file or directory
awk: 0602-533 Cannot find or open file 21494.
The input line number is 0. The file is 21494.
The source line number is 1.
ERROR: Unable to start nvsecd with ovstart.
ERROR: Unable to start nvsecd with ovstart.
ERR_0003_040
ERR_0003_040
+ dspmsg -s 5 nv6000.cat 9999 customize: Failing customize
with exit
code %s\n 2
+ 1>> /tmp/update.log
customize: Failing customize with exit code 2
ERROR: Customize script for fileset OVWIN exited with code
2.
ERR_cfgbf_001
nvconfigbf: Failing doing configuration with exit code 2
base: Failure running script or command
'/usr/OV/install/tools/nvconfigbf'
ERR_bcfg_210
base: Failing base.config with exit code 2
Any ideas ?
Thank you.
Mario Behring
Tivoli Certified Consultant
IBM Brazil
mariob AT br.ibm DOT com
mariobehring AT yahoo DOT com
__________________________________
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25¢
http://photos.yahoo.com/ph/print_splash
|
|
|