Re: [nv-l] netviewd.lrf problems
2004-04-19 09:34:28
Peter,
If the line does not start with a 0: then in is an inactive
entry and can be removed(serversetup has a way to do
this). That being said, removing that last line 1:whatever
should not have made any difference at all.
Are all the daemons starting OK, including netviewd?
Can you do "snmpwalk localhost"?
The map not starting sounds like you are unable to reach
your snmp daemon on the NetView server. Check the above
and let us know your results.
Paul
Peter.Ingleson AT atradius DOT com wrote:
Hello again list,
Solved my initial problem, I had removed the line
netviewd:/usr/OV..... from the netviewd.lrf.
If I register netviewd.lrf with the following in the file I get
problems loading Netview, the process just seems to sit there and I
cannot open a GUI. When I try to connect using the webconsole I get no
maps open.
Netviewd.lrf as follows
netviewd:/usr/OV/bin/netviewd:
OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd
actionsvr nvserverd:-spmd 2, -ro:OVs_WELL_BEHAVED:30:
When I look in ovsuf I see the following.
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd
2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd
2:OVs_WELL_BEHAVED:30:::
1:netviewd:/usr/OV/bin/netviewd:OVs_YES_START:nvsecd pmd ovwdb trapd
ovtopmd ovactiond nvcorrd actionsvr nvserverd:-spmd 2,
-ro:OVs_WELL_BEHAVED:30:::
Any suggestions would be appreciate, should I remove the additional
lines in ovsuf??
Regards
Peter
-----Original Message-----
*From:* Ingleson Peter GB
*Sent**:* 19 April 2004 10:56
*To:* nv-l AT lists.us.ibm DOT com
*Subject:* [nv-l] netviewd.lrf problems
Hello List,
I've been trying to add the -ro flag to my netviewd.lrf file so my
webconsole map runs as read only, however I kept receiving the error
below. I removed the -ro from the file and still I receive this error.
Any suggestions on where to look would be appreciated.
[gl02]:/usr/OV/lrf#sudo ovdelobj netviewd.lrf
ovdelobj - Static Registration Utility
ERROR: Invalid value in LRF record #1, Quality Of Service field. (OVs
1-13)
My netviewd.lrf contains
OVs_YES_START:nvsecd pmd ovwdb trapd ovtopmd ovactiond nvcorrd
actionsvr nvserverd:-spmd 2:OVs_WELL_BEHAVED:30:
Running on AIX 5.1 ML5 NV 7.1.3
Regards
Peter
|------------------------------------------------------------------------------------------------------------|
|This message is intended for the addressee or its representative only. |
|Any form of unauthorized use, publication, reproduction, copying or |
|disclosure of the content of this e-mail is not permitted. If you are |
|not the intended recipient of this e-mail message and its contents, |
|please notify the sender immediately and delete this message and |
|all its attachments subsequently.|
|
|
|