Bill, I had already tried that but no go. Most of our routers have
loopback addresses with a 32 bit mask. I have several other routers that
have two entries in the Netview database, one with hostname as selection
name and other with loopback address with selection name. They have no
problem being managed by Netview. But there are these couple of campus
routers (like the one in my example) that just don't want to stay in
Netview.
**Fawad **
-----Original Message-----
*From:* owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com]
*On Behalf Of *Stringfellow, William
*Sent:* Friday, March 05, 2004 5:35 PM
*To:* nv-l AT lists.us.ibm DOT com
*Subject:* RE: [nv-l] added router disappears in 30s
Fawad,
Notice that the object printout you provided is for a network, not a
device. If this existed before your add, Netview will notice you have 2
objects with the same IP address and will do what you described, delete
the object.
Delete this network object and then try adding the device again. It
won't hurt anything, since the interface count is 0 and the netmask is
255.255.255.255, nothing can be contained in it.
Good luck,
Bill
Bill Stringfellow
EDS - Bank of America Account Team
Network Management Support
CA4-704-02-03
2000 Clayton Road, Building D
Concord, CA 94520
Office: 925.692.7283
Fax: 925.675.1763
Email: william.stringfellow AT eds DOT com
Cell: 925.765.2648
-----Original Message-----
*From:* Qureshi, Fawad [mailto:Fawad.Qureshi AT ssa DOT gov]
*Sent:* Friday, March 05, 2004 10:47 AM
*To:* 'nv-l AT lists.us.ibm DOT com'
*Subject:* [nv-l] added router disappears in 30s
NV 7.1.3 / AIX 5.1
I add a router using loadhosts. I can do ovobjprint on the hostname
as selection name right away, and it shows all attributes just as
expected. I do ovobjprint again, and its gone! I do ovobjprint on
the loopback address as selection name, and it shows (but not all
attributes - see below in blue).
Strange, very strange! Any thoughts?
BTW, when ovobjprint works the first time with hostname as selection
name, isSNMPsupported is FALSE and SNMPAgent attribute shows as
Unset(0).
OBJECTID SELECTION NAME
OBJECT: 98762
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "172.16.0.160"
14 OVW Maps Exists 1
15 OVW Maps Managed 1
80 Network Address "172.16.0.160"
81 IP Subnet Mask
"255.255.255.255"
82 IP Status Unmanaged(5)
83 IP Network Name "172.16.0.160"
113 isLocation FALSE
114 isNetwork TRUE
115 isInternet FALSE
118 isSegment FALSE
119 isBusSegment FALSE
120 isStarSegment FALSE
121 isTokenRingSegment FALSE
122 isFDDIRingSegment FALSE
152 isIP TRUE
219 TopM Segment Count 1
221 TopM Interface Count 0
226 TopM Default Seg ID 98763
**Cheers **
**Fawad Qureshi**