RE: [nv-l] Object Information

Subject:	RE: [nv-l] Object Information
From:	"Allison, Jason (JALLISON)" <JALLISON AT arinc DOT com>
To:	"'nv-l AT lists.us.ibm DOT com'" <nv-l AT lists.us.ibm DOT com>
Date:	Wed, 25 Feb 2004 10:55:45 -0500

I dont think so. Have you issued commandline snmpget's or snmpwalks to look at the specific MIB variables?

I would guess the infrastructure group needs to make sure their config was saved and loaded.

Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026

-----Original Message-----
From: Caballero, Herman - Herman E [mailto:Herman.E.Caballero AT Lowes DOT com]
Sent: Wednesday, February 25, 2004 10:52 AM
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] Object Information

I had the engineer group add contact information to a set of routers, and I don't see them in them in the Tools/Display Object Information. Do I have to delete and rediscover these devices to get that info?

Thank you,

Herman E. Caballero

<Prev in Thread]	Current Thread	[Next in Thread>
[nv-l] Object Information, Caballero, Herman - Herman E RE: [nv-l] Object Information, Allison, Jason (JALLISON) <= RE: [nv-l] Object Information, Scherting, Mark RE: [nv-l] Object Information, Barr, Scott

Previous by Date:	[nv-l] Object Information, Caballero, Herman - Herman E
Next by Date:	RE: [nv-l] More location.conf questions..., Christopher J Petrina
Previous by Thread:	[nv-l] Object Information, Caballero, Herman - Herman E
Next by Thread:	RE: [nv-l] Object Information, Scherting, Mark
Indexes:	[Date] [Thread] [Top] [All Lists]