nv-l

RE: [nv-l] Move (cut/paste) Locations in IP-Internet

2003-12-01 11:44:18
Subject: RE: [nv-l] Move (cut/paste) Locations in IP-Internet
From: "Davis, Donald" <donald.davis AT firstcitizens DOT com>
To: "'nv-l AT lists.us.ibm DOT com'" <nv-l AT lists.us.ibm DOT com>
Date: Mon, 1 Dec 2003 11:35:37 -0500
Karl
Step 5 should be Cut/Paste NOT Copy/Paste
Don
 

=======================
Donald Davis
First Citizens Bank
Raleigh, NC.  27603-3526
 

-----Original Message-----
From: Davis, Donald [mailto:donald.davis AT firstcitizens DOT com]
Sent: Monday, December 01, 2003 8:41 AM
To: 'nv-l AT lists.us.ibm DOT com'
Cc: 'Karl-Heinz.Gerriets AT GAD DOT de'
Subject: RE: [nv-l] Move (cut/paste) Locations in IP-Internet

Karl,
You cannot cut/paste a Location. It must be deleted and recreated.
A Location cannot be deleted unless it is empty.

I suggest you do the following:
1. Open SubTree_2_1 and turn OFF automatic layout
2. Open Bank_A in SubTree_1_1 and cut (from this submap) all of it's contents (Networks & Routers) and paste them into SubTree_2_1

   They should all go into the new New Object Holding Area.
3. Delete Location Bank_A from SubTree_1_1
4. Add a new Bank_A under SubTree_2_1
5. copy/paste the objects from the New Object Holding Area into the new Bank_A


=======================
Don Davis
First Citizens Bank
Raleigh, NC.  27603-3526
 


-----Original Message-----
From: Karl-Heinz.Gerriets AT GAD DOT de [mailto:Karl-Heinz.Gerriets AT GAD DOT de]
Sent: Monday, December 01, 2003 5:33 AM
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] Move (cut/paste) Locations in IP-Internet


Hello list ..

NV-Version 7.1.3 / running on SUN
we use:
      - one map (default)
      - location.conf to place networks / routers in Bank-Folders
      - seed-File (limited) discovery
      - Netview-dconsole (Write-Map) to handle Map-Administration

Scheme:
                         root
                          ||
            #---------IP-Internet---------#
            |                             |
         SubTree_1                     SubTree_2
            |                             |
         SubTree_1_1                   SubTree_2_1
            |                             |
>>>>>     Bank_A                        Bank_B
            |                             |
      Network's / Router's          Network's / Router's

Question:
      - How can I move the hole Bank-Folder(Bank_A) from SubTree_1_1 to
SubTree_2_1  without deletion the content of Bank_A and rediscover ?
      - If I try cut Bank_A, following messages occurs: 1 Symbol could not
be deleted; use hide to remove ..

Search in nv-list was not succesfully .. any suggestions ?

Karl-Heinz Gerriets
Produktion / Überwachungswerkzeuge und Automation
octohelp OL1096117
eMail:  Karl-Heinz.Gerriets AT GAD DOT de
http://www.gad.de




------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.
==============================================================================

<Prev in Thread] Current Thread [Next in Thread>