Dominic,
You need SNMP access to the switch so that NetView can learn from the address table that all of those addresses are actually on the same device.

If you cannot gain SNMP access your other option is to put all of the IP Addresses in your /etc/hosts file.
Use the exact same name for the switch for each and every IP Address.
Don

=======================
Donald Davis
First Citizens Bank
Raleigh, NC.  27603-3526
 

-----Original Message-----
From: D'Apice, Dominic [mailto:D.D'Apice AT SAQ.qc DOT ca]
Sent: Monday, May 05, 2003 12:46 PM
To: Netview - List (E-mail)
Subject: [nv-l] multiple same switch

Hi all, netview 7.1.3 + fixpack 1 on aix

What dows it means when netview show a switch but in multiple (see the file)

 <<multiple same switch.jpg>>

thanks

Dominic D'Apice
* D.D'Apice AT saq.qc DOT ca

------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.

==============================================================================