Donald,
Are you using MLM on your Netview server? The MLM configuration file
will affect snmpwalk and will cause End of
MIB earlier than you expect.
Robin
Great information here about the Solaris SEA, Thanks
Jane. Does anyone have a working "snmpd.conf" for Linux. Thanks, Don Davis
First Citizens Bank Raleigh, NC.
-----Original Message----- From: Ray
Westphal [mailto:westphal2002 AT charter DOT net]
Sent: Monday, February 24, 2003 7:22 PM To: Oliver Bruchhaeuser; nv-l AT lists.tivoli DOT com Subject: RE: [nv-l] Sun SNMP agent problem then NetView deletes object.
Thanks Oliver (and you too, Jane!)
-----Original Message----- From: Oliver
Bruchhaeuser [mailto:oliver.bruchhaeuser AT de.ibm DOT com]
Sent: Friday, February 21, 2003 3:10 AM To: nv-l AT lists.tivoli DOT com Subject: Re: [nv-l] Sun
SNMP agent problem then NetView deletes object.
Raymond,
Jane Curry wrote an excellent whitepaper which might help you: Tivoli Field Guide - SNMP Agents for Solaris and
their Integration with Netview and Mid-Level
Managers You can download it from here: http://www-3.ibm.com/software/sysmgmt/products/support/Field_Guides_Technica
l.html
Kind regards
Oliver Bruchhaeuser Tivoli NetView EMEA
L2 Support
|---------+----------------------------> |
|
"Westphal, | |
|
Raymond" | |
|
<[email protected]| |
|
om>
| |
|
| |
| 20.02.2003 18:14
| |
|
| |---------+---------------------------->
>---------------------------------------------------------------------------
--------------------------------------| | |
| To:
"NV List (E-mail)" <nv-l AT lists.tivoli DOT com> | |
cc: "Erdey, Raymond M"
<Raymond.M.Erdey AT erac DOT com> | | Subject: [nv-l] Sun
SNMP agent problem then NetView deletes object.
| | | | |
>---------------------------------------------------------------------------
--------------------------------------|
Hello Everyone. NetView 7.1.3 on AIX
4.3.3 ML10
I'm having troubles with NV deleting Sun server objects from the
map. It is important for us to know when these SUN
servers have problems so I have notification rules setup
to page when they go down. I have the "!@oid 0" line in
netmon.seed to prevent NV adding non-SNMP supported devices to the map.
I noticed that the objects NV deletes no longer respond to
snmpwalk as expected.
The command "snmpwalk servername system" returns End of MIB or no MIB objects contained under subtree
The command "snmpwalk servername" returns about a page of sun.products.sunMasterAgent subtree objects but no system subtree, etc.
I think it is this abnormal response that causes NV to delete
the object. If the response to
the snmpwalk simply timed out, NV would not remove the server from the map. Correct? The only way I could get NV to add the
device was to have the server admin run the
/etc/init.d/init.snmpdx stop and /etc/init.d/init.snmpdx
commands.
Is there a way to prevent NV from deleting the object when its
SNMP agent is in this condition?
I cannot remove the "!@oid 0" line in the netmon.seed file.
Thanks in advance.
Ray Westphal > Enterprise
Rent-A-Car >
---------------------------------------------------------------------
To unsubscribe, e-mail:
nv-l-unsubscribe AT lists.tivoli DOT com For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE* This is not an Offical Tivoli
Support forum. If you need immediate assistance from
Tivoli please call the IBM Tivoli Software Group help
line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail:
nv-l-unsubscribe AT lists.tivoli DOT com For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE* This is not an Offical Tivoli
Support forum. If you need immediate assistance from
Tivoli please call the IBM Tivoli Software Group help
line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail:
nv-l-unsubscribe AT lists.tivoli DOT com For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE* This is not an Offical Tivoli
Support forum. If you need immediate assistance from
Tivoli please call the IBM Tivoli Software Group help
line at 1-800-TIVOLI8(848-6548)
------------------------------------------------------------------------------ This
electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have received
this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have
received this electronic mail in error, please immediately notify the sender by
return
mail. ==============================================================================
____
This message and any files transmitted with it are legally privileged and intended for the sole use of the individual(s) or entity to whom they are addressed. If you are not the intended recipient, please notify the sender by reply and delete the message and any attachments from your system. Any unauthorised use or disclosure of the content of this message is strictly prohibited and may be unlawful.
Nothing in this e-mail message amounts to a contractual or legal commitment on the part of EUROCONTROL unless it is confirmed by appropriately signed hard copy.
Any views expressed in this message are those of the sender.
|