Re: [nv-l] Physical port monitoring
2003-02-20 10:37:40
"Mike Walsh" <Mike.Walsh AT us.ing DOT com> writes:
> Goodmorning,
>
> I have a 5 T1 IMA group. The IMA Group (Common IP address) is up but one
> of the physical T1's is hard down. Netview does not seem to monitor or
> alarm on the failure of a single T1 in the IMA Group. Does anyone out
> there know of a means of forceing Netview to monitor and alarm on a single
> physical port?
Caveat: I'm not familiar with "T1's in an IMA group." So I can offer
these general thoughts:
What do the T1's terminate into (CSU/DSU?)? Is that device SNMP
manageable? Would there be MIB variable you could query with netview
or a script to find what you seek? Does the device trap on the
failure of any of hte physical links?
--
Todd H.
http://www.toddh.net/
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|
|
|