nv-l
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [nv-l] 7.1.3 on AIX 5.1

2002-12-18 12:01:32
Subject: Re: [nv-l] 7.1.3 on AIX 5.1
From: Ken.Garst AT kp DOT org
To: reamd AT Nationwide DOT com
Date: Wed, 18 Dec 2002 12:01:32 -0500

Run the command "sysdumpdev -e" to get an estimate of the dump size needed.

Create two logical volumes "hd7" and "hd7x" on separate physical disks.  These will be your dump spaces.

Run the commands:

sysdumpdev -p /dev/hd7
sysdumpdev -s /dev/hd7x

Run the command "sysdumpdev -l" which should show the primary dump device is now hd7 and the secondary dump devices is hd7x.

Regards,
ken

p.s.  do NOT use paging space as the dump device contrary to what IBM by default does.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [nv-l] Mhamed Gaouar/Technocentre Regional/Reg06/SSSS est absent(e)., mgaouar
Next by Date:  RE: [nv-l] SmartSets - How do I delete unwanted SmartSets, Barr, Scott
Previous by Thread:  [nv-l] 7.1.3 on AIX 5.1, reamd
Next by Thread:  [nv-l] SmartSets - How do I delete unwanted SmartSets, O'Connor, Sean
Indexes:  [Date] [Thread] [Top] [All Lists]